OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
DK8KV  > QRP      13.08.98 11:34l 31 Lines 1168 Bytes #-10323 (0) @ EU
BID : 138802DB0MKA
Read: DG6MS DL2MHG GUEST
Subj: SG2020 add. Info
Path: DB0ZKA<DB0GPP<DB0LX<DB0CZ<F6KFG<DB0GE<DB0IZ<DB0MKA
Sent: 980813/1002z @:DB0MKA.#NRW.DEU.EU [HennefJO30PR DL3OE] $:138802DB0MKA
de DK8KV @ DB0MKA.#NRW.DEU.EU   (Walter)

to QRP @ EU

SG-2020 Tech UPDATE
Updated: August 10, 1998 

IMPORTANT INFORMATION UPDATE FOR OPERATORS OF THE SG-2020
             HF SSB TRANSCEIVER AUGUST 1998 

1-A. SG-2020 Procedure for power on or intermittent
     power supply 'glitch display' @ 66 MHz.

     The following procedure will cure the intermittent problem of the
     SG-2020 "power on glitch" when the display reads 66 MHz.
            (a) Power on radio
            (b) Engage "channel scan" mode, by doing the following:
                 (a) depress and hold "CMD" button 
                 (b) depress "MEM" button
                 (c) release "MEM" button
                 (d) release "CMD" button
     NOTE: It may take up to 2 minutes to re-establish the memories, although it is
           usually accomplished in just a few seconds.
                 (c) Exit "channel scan" by depressig any key.

2-A. SG-2020 Fuse
     The SG-2020 has an internal, self-recovering, 5 amp fuse. 
     This fuse is not visible and it is mounted under the LPA PCB.  The
     fuse will recover within a few seconds after the short in the radio
     has been removed.



Read previous mail | Read next mail


 17.11.2026 15:11:51lGo back Go up