OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
DL8FBH > QRP      06.07.98 17:37l 47 Lines 1394 Bytes #-10361 (0) @ DL
BID : 678DB0AIS026
Read: DL6MEE DL1MDY DL7ATE GUEST
Subj: (fwd) Re: Sub-mini QRP transceiver
Path: DB0ZKA<DB0ABH<DB0SRS<DB0AIS
Sent: 980706/1625z @:DB0AIS.#HES.DEU.EU [LBCM FFM JO40IC OP:DL3FDU] bcm1.40
From: DL8FBH @ DB0AIS.#HES.DEU.EU  (Michael)
To:   QRP @ DL
Reply-To: DL8FBH @ DB0LJ.#RPL.DEU.EU
X-Info: No login password

R:980706/1626z @:DL8FBH.AMPR.ORG [Hanau] JNOS 1.11a (Linux) #:18311 $:22118dl8fbh

-- forwarded message --

From: Harry Lythall <harry.lythall@no.where>
Subject: Re: Sub-mini QRP transceiver
Date: Mon, 06 Jul 1998 11:55:45 +0200

Will White wrote:

> I am looking for plans for a really small QRP transceiver for 40 or 30
> meters. I want something that will fit in a 3x3x1 box, RIT, QSK and
> keyer, >3W, >50KHz tuning range, and crystal filter, and ideally no more
> than two boards (thus the Kanga Oner is out).
> --
> Will White, KD7BFX
>
> *****************************************
> "I make coffee nervous" --Nora Ephron
> *****************************************

I have the circuit diagram of a transmitter that uses a TTL chip plus a PA
(with a couple of other components). Worked fine with 5 watts output and
small enough to fit in a matchbox (3 x 2.5 x 1, without heatsink). The
circuit is on the net, the URL of the project is:

http://user.tninet.se/~acz732k/tx/5watttx.htm

Best regards Harry, SM0VPO
(PS. My PC is knackered so you will not get any reply to E-Mail address
quoted on the homepage - sory)

-- end of forwarded message --


Michael
-
44.130.24.127 ==> dl8fbh-10, http://dl8fbh.ampr.org
BOX: db0lj.#rpl.deu.eu        AX-ROUTE: via db0gv-7




Read previous mail | Read next mail


 17.11.2026 18:14:35lGo back Go up