| |
DL1FDF > QRP 20.04.98 22:52l 86 Lines 3880 Bytes #-10438 (0) @ DL
BID : 204801DB0VFK
Read: DL6MEE DG6MS GUEST
Subj: K2 BESCHREIBUNG in ENGLISCH...
Path: DB0ZKA<DB0ABH<DB0SRS<DB0SIF<DB0KH<DB0EAM<DL0EAM<DB0VFK
Sent: 980420/2021z @:DB0VFK.#HES.DEU.EU [JO41SG TheBox DG5FAU] $:204801DB0VFK
de DL1FDF @ DB0VFK.#HES.DEU.EU (Steve)
to QRP @ DL
Date: Mon, 13 Apr 1998 10:48:18 -0500
From: Tellefsen Bob-CNSE97 <cnse97@lmpsil02.comm.mot.com>
To: QRP-L list <QRP-L@Lehigh.EDU>
Subject: [8133] K-2 prototype at NorCal
Message-ID: <351A2DFAE256D111883A0060B06B16625DBF60@s-il02-j.comm.mot.com>
MIME-Version: 1.0
Content-Type: text/plain
I'm just catching up on back QRP-L posts. Haven't seen any descriptions
of the K-2 prototype that Wayne and Eric showed at the NorCal meeting.
Having eagerly poked all around the rig, I'll give you my impressions so
far. I know there are a few inquiring minds out there.
First off, like their web page shows, the box is roughly halfway between
the Sierra and the TT Scout. A very nice size. The mechanical assembly
is clean and straightforward. The front panel removes easily for access
to the pc board behind it. The top and bottom covers are removable
without removing the front cover or bottom half of the rear cover. The
top cover bends over at the rear and is the upper half of the rear
cover. The case will go together easily when we finally get out hands
on this rig. I asked Wayne who his mechanical designer had been. He
grinned and said, "me". Talk about your Renaissance man.
The pc board layouts are classic Wayne Burdick. Clean parts layout,
straight signal flow, minimum amount of wire throughout. The front
panel controls consist of knobs and buttons. The buttons are
multiplexed. A short press gets you the function labeled above the
button. A bit longer press gets you the function below the button. No
shift key needed.
The tuning knob has several tuning rates. The slowest will make a very
sharp filter easy to use. With the uP conrol of the rig, stability
should be quite adequate for a sharp filter. I keep harping on this as
I really like a sharp filter for cw. Wayne said he felt the variable
bandwidth IF filter would be good down to 300 Hz or so at the nose. No
idea what skirt shape would be yet. I asked about the fixed filter he
refers to. It would be a kit also, and you could switch between the
variable bandwidth and the fixed filter. Specs on the fixed filter
undecided as yet. I'm pushing for about 250 Hz with steep skirts.
We didn't talk about receiver sensitivity, but it is quiet enough that
you can hear the noise level drop when disconnecting the antenna on even
a quiet band.
Bandswitching is acomplished with tiny reed relays in what look like 8
pin DIP packages. Wayne said that he and Eric had measured up to 80 dB
of isolation between the contacts, quite satisfactory for bandswitching.
This certainly leads to a clean layout and signal flow.
Wayne had not assembled his unit's PA by meeting time. However, running
off the driver stage, he was getting about 750 mw, and had a sucessful
QSO already. We had a few QSOs across the parking lot at the meeting,
and the rig sounded very clean and crisp.
Wayne showed us where various options would plug into the mother board.
An audio filter would supplement the IF filter for additional
selectivity. A noise blanker plug-in is provided. Another plug-in
provides 160m operation, plus provides a second independent receiver
input for all bands.
Some options are intended to mount in the top cover, with ribbon cable
to the mother board. The cable would be long enough that the top cover
could be laid on the table beside the rig, upside down for option
access.
All in all, one neat rig. No particular connection with EleCraft, other
than "I Want One!!!".
72, Bob N6WG
------------------------
qsp de dl1fdf
=========================================================================
AX25: dl1fdf@db0vfk.#hes.deu.eu | dl-qrp-ag GM |g-qrp 8769 |qrpl 252 |ARS
e-mail: bauer@student.uni-kassel.de | 72 de steve DL1FDF -- DL/VY1QRP
=========================================================================
Read previous mail | Read next mail
| |