| |
IK2NBU > QRP 07.01.00 13:03l 63 Lines 2582 Bytes #-9810 (0) @ WW
BID : 7690-IK2HNG
Read: DL2MHG GUEST
Subj: QRP Antennas
Path: DB0ZKA<DB0KFB<DB0CZ<DB0GE<DB0ME<ON6AR<WB0TAX<WU3V<I1YLM<I1YLM<IK2QCA<
IK2HNG
Sent: 991228/2008Z @:IK2HNG.ILOM.ITA.EU #:7690 $:7690-IK2HNG [ARI Bergamo]
From: IK2NBU@IK2HNG.ILOM.ITA.EU
To : QRP@WW
The QRP Antennas : how the situation can change!
Before to build rtx QRP , i started with the antennas since 1976, and the experiments made
during the years have today a new opportunity :
On HF band, the situation move to our favour !
In fact in the 70/80 years the QRP CW must have god antennas ( One dipole full size with a
god site ) and the SSB QRP must have a Yagi/Quad single band to make dx with 5 watt or less.
During this period the band was busy with many operators every day and night , also out a
contest and with a regular propagation for long time.
Now the traffic is very quite and so we have a window to operate QRP CW and SSB , without a
100 watt signal in the next 2 khz band like a hammer.
Also during a contest is possible have fine qso in QRP.
So , the antennas to make QRP are not like in the past and the relationship between antenna
size/qso is now profitable to us .
The following antennas i show , are used in my little garden with continuos experiment and
with many QRP DX with homebrew RTX , two fact are important yesterday as today :
Also if reduced in size , the antenna must be single band.
Not exist a ideal antenna ,every QTH have the best antenna solution.
The hand made antennas of IK2NBU in QRP :
1.8 Wire of 20 mt long with a center loading coil as 1/8 wave sloper
3.5 The same wire excluding the coil as 1/4 sloper
7 Tower of 6 meter with omega match at the base as a vertical reduced in size.
10 Magnetic loop 2 m d. alluminium made, at only 2 meter from the ground.
14 Simple Dipole inverted V at 5 meter from the ground , tree supported
18 to 28 Mhz magnetic loop 1 mt d. made in coaxial cable at 9 mt from the ground.
My site in a underground depression, so the maximum high of my antenna is like have the
antennas on the balcony at the second floor , i have severals walls but the ground of my little
garden is god.
So nothing to special , every site have a solution for the aerial system.
In 3.5 Mhz i used also a 9 mt fish boom with a base load ant match coil , but during a storm..
As classic solution, you can start with a inverted dipole single band in the best site is possible,
using the magnetic loop is a god strategy to reduce the noise and is perfetc for the QRP.
I made many QSO with Eurpean station with internal/external loop, we don't make jump
across the band , we have official frequency in CW and SSB , so my 1 mt d. loop work fine.
Make your experiment with antennas , and god QSO in QRP !
De ik2nbu I QRP CLUB n.001
Read previous mail | Read next mail
| |