| |
DK8KV > QRP 12.10.99 19:27l 121 Lines 5069 Bytes #-9897 (0) @ DL
BID : 12A909DB0MKA
Read: GUEST
Subj: K2: SSB/NB option
Path: DB0ZKA<DB0LX<DB0CZ<DB0LJ<DB0FHK<DB0MKA
Sent: 991012/1755z @:DB0MKA.#NRW.DEU.EU [HennefJO30PR DL3OE] $:12A909DB0MKA
de DK8KV @ DB0MKA.#NRW.DEU.EU (Walter)
to QRP @ DL
Hi gang,
Sorry to be out of touch for a while... career stuff, ya
know ;-)
I recently had an opportunity to visit Wayne at "Elecraft
North" and test drive some of the new K2 options headed
your way. And, no I don't have an SSB adapter in my K2 as
yet ;) But I soon will !
First things first. I got acquainted with Wayne's new
daughter, and future CEO of Elecraft, Ms. Marissa Burdick.
She's a *real* charmer and we would have talked longer,
but she had to get back to her personal trainer and her
C++ programming lessons. They start them out pretty early
here in 6-Land.
1.) The K2-SSB adapter. Wayne walked me through a live
demo, we looked at the neat installation in his K2 and
then got down to business and checked into the 20m
Maritime Net for a "radio check." Great reports from the
east coast and 5-Land running about 10W to Wayne's
homebrew tuner to his end-fed random wire that terminates
into the 50 foot redwood tree behind his lab. Yes, it's
the same wire he wrapped around a tennis ball and
hand-launched several years ago. I was very impressed with
transmit and receive performance. You're going to love
this one!
I've also had the opportunity to QSO with N6KR from my QTH
(2 miles south) and we nearly got Eric/WA6HHQ in a "3-way"
when he was up in Tahoe on vacation. I had to run my
IC-735, but Wayne and Eric were both running K2's. Wayne
and I didn't have a great path to Eric, so that was tough
going -- but I was very impressed with how the Wayne and
Eric's K2's sounded on my Icom. Later, Wayne and I ran
through all the bands and tested SSB filters, speech
compression, and overall performance. I voted for a bit
more compression --a bit more Yaesu punch ;-) Normal voice
sounded perfect. Wayne noted that he would pump-up the
compression a bit.
SSB summary: Ever read all the "chest pounding" on QRP-L
about, "I threw my Mic away 10 years ago?" Well, a *lot*
of those guys are going to looking for those Mics! With
10M & 15M running hot, the K2-SSB is really going to be a
blast!
2.) The K2-NB (Noise Blanker): Firstly, I'll admit that
I've never been overwhelmed with most ham radio NB's --
seems like *my* noise source is always outside their realm
of influence ;) However, the K2-NB does a *very* effective
job on common noise sources when tested in Wayne's Noise
Lab -- under the hood of his rust-colored 1989 Mazda
sedan, with a "sniffer wire" wrapped around the ignition
coil on the Mazda engine -- fed directly into the BNC on
the K2! It works! Now, will it snuff out your neighbor's
arc welder or electric cattle fence? Uummm, YMMV. But, the
great news is Wayne sounds open to discussions on arc
welder and electric fence mods :) Now, if I could only
influence Wayne to incorporate Icom's newly-designed, 32
bit floating point DSP Digital IF filter with 51
selectable bandwidths, microphone equalizer, manual notch
function! But, that's a lot to ask for $29.00, eh?
NB Summary: as Noise Blankers go, the K2-NB is far better
than most and as good as an IC-781-NB! It's a good buy!
3.) The K2 160M/dual ant option: I'm not a fan of 160M --
probably because I've never been able to erect a
competitive antenna for the lowfer. But, dual-antenna
switching is a "must have" for me. I constantly switch
between the yagi and the wire. But, the *real* reason to
buy this option is that it receives AM broadcast... well,
part of the AM band anyway. And, Wayne tells me that mod
info will be available to "open up" the board for those of
us who enjoy late nite AM DXing -- we'll be able to tune
the entire AM band! As a demo, we tuned into a
Bible/Talk-Show/Right-Wing/Palm-Reading/Elvis station just
south of 160M. Wayne and I shared a lot of laughs as the
DJ did his thing! The man was a pro and we learned a lot
about Y2K mania, Elvis and palm-reading.
160M Summary: Lowfer or not, you'll use the dual ant
switching and AM DXing will take you back to your youth!
At $29.00, it's a buy!
4.) The K2-ATU: I got a chance to inspect this little
two-board wonder -- about the size of quarter-pound stick
of margarine -- only a bit shorter. It will reside just
behind the K2 internal battery. Very clever little
package. No wires. All headers. Slick! The ATU wasn't
fully populated when I checked it out -- obviously not
functional at that point. It will offer latching relays
(no holding current), memories (less need to retune from
scratch), and best of all it will be K2-internal --
all-in-one-box convenience! Naturally, the ATU and the K2
will be able to *talk* to each other -- much smoother
operation, even if you're as much of an LDG fanatic as I
am.
ATU Summary: If Elecraft's ATU is a good as LDG's it will
be worth the money - $125.00 - simply because it's
internal. To which Wayne replied, "Hey, my daughter wrote
the firmware for this thing. Just wait until you demo the
ATU, Mister!"
So, if you like your K2, you'll like the options. They are
typical of Elecraft's high quality and reasonably priced,
IMO.
Gud DX es Happy Pacificon to all !
72,
Conrad Weiss - NN6CW
Read previous mail | Read next mail
| |