OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
DK8KV  > QRP      18.09.99 09:54l 59 Lines 2763 Bytes #-9921 (0) @ DL
BID : 189902DB0MKA
Read: DL2MHG DL2GRF GUEST
Subj: K2 SSB-Option (ELecraft)
Path: DB0ZKA<DB0LX<DB0CZ<F6KFG<DB0GE<DB0PSC<DB0CPU<DB0MKA
Sent: 990918/0840z @:DB0MKA.#NRW.DEU.EU [HennefJO30PR DL3OE] $:189902DB0MKA
de DK8KV @ DB0MKA.#NRW.DEU.EU   (Walter)

to QRP @ DL

Hallo K2-Interessierte,

Wayne Burdick arbeitet zur Zeit noch an einem VOX-Softwaremodul (Firmware)
und an der Vervollstaendigung des Handbuchs. Weitere Neuigkeiten zum SSB-
Modul hat er heute in die Webseite eingestellt. 73 Walter:

From: Wayne Burdick <n6kr@elecraft.com>
Date: Fri, 17 Sep 1999 17:58:19 -0700
Subject: [Elecraft] new SSB adapter feature
Message-Id: <v0310280fb4088beb7802@[206.169.249.132]>

Hi all,

I know some of you are anxiously awaiting the SSB adapter's arrival, so I
thought I'd give you something else to look forward to when you get it. We
just added a new feature that should be of interest: the K2 will allow you
to tailor both transmit and received audio in SSB modes.

On SSB, it's important to set up the BFO for the best transmit audio (you
can do this by listening to your own signal, or by asking for signal
reports as you change the BFO parameter). However, you may want to set up
filters differently on receive. The K2 will let you do this using CAL FIL.
For example, you might want to set up the BFO for FL2 so that the voice
range is shifted a bit higher -- similar to what you might do with an IF
passband tuning control. You can even use the CW filter for SSB receive. If
you do a lot of digital-mode work, it might make sense to use three
different settings of the CW filter for FL2, 3 and 4, but leave FL1 set up
for normal SSB operation, using the fixed filter on the SSB adatper. I've
found that the variable CW filter is great on SSB at times when the QRM is
very heavy. You can still understand the audio with settings of 1.5 kHz or
less.

To keep all of these wild receive filter/BFO settings from impacting how
you sound on transmit, the firmware automatically switches to FL1 (and BF1)
on transmit in all modes. This is critical on SSB, since the BFO has to
stay in one spot in relation to the fixed filter. (It isn't as big an issue
on CW since the crystal filter is not involved--the firmware just adjusts
the VCO to compensate for BFO changes. But the new code will prevent even
very small shifts in TX carrier frequency that might occur when you change
filters with XFIL.)

To remind you that FL1's BFO is the one that is always used on transmit, we
have modified the CAL FIL display slightly. The BFO display for FL1, which
at present is displayed as "BF1," is now "BFt", where 't' means "transmit."
If you use FL1 on receive, you'll simply be using the same BFO setting for
both transmit and receive, which we recommend except in the cases mentioned
above. (Of course, the SSB adapter also enforces the use of the fixed SSB
filter on SSB transmit. You can't transmit SSB through the variable CW
filter.)

Stay tuned for more SSB tidbits!

73,
Wayne




Read previous mail | Read next mail


 16.11.2026 21:22:48lGo back Go up