| |
DL4YHF > QRP 12.08.99 21:54l 63 Lines 2935 Bytes #-9958 (0) @ EU
BID : 128912DB0EAM
Read: OM2ZZ GUEST
Subj: QRP-Keyer: Info (updated)
Path: OE1XAB<OE3XPR<OE6XYG<9A0BBS<9A0YKZ<S50BOX<S50MBL<IV3LAV<IV3AVQ<IW3FPP<
IN3TTI<IW3AQL<IN3TRX<OE7XBB<DB0PV<DB0MAK<DB0ERF<DB0NHM<DB0EAM
Sent: 990812/1711z @:DB0EAM.#HES.DEU.EU [Kassel DB8AS] LT:100 $:128912DB0EAM
de DL4YHF @ DB0EAM.#HES.DEU.EU (Wolfgang)
to QRP @ EU
Short description of a homebrew "QRP keyer" with a PIC microcontroller
----------------------------------------------------------------------
(updated 12.Aug.99)
This project describes the construction of a real "QRP" keyer
with a small microcontroller (PIC 16F84). This keyer features :
- variable CW speed, adjustable via poti from 20 to 300 letters per minute
- two message-memories (50..64 letters), each controlled by a pushbutton
- command mode only required for setup and more complex features
- special modes like "endless" calling loop
and automatic contest number generation
- very low power consumption: 50 microampere at 2.4 V supply when active,
less than 1 microampere in standby mode (which is enterd automatically)
- simple circuit, can be built on PCB with less than "half matchbox size"
- dash/dot-memory can be turned on and off
(I guess that's "Iambic mode A" and "B")
- Controller is clocked by a built-in RC-oscillator
with only 50kHz clock frequency
- passive piezo speaker can be connected as sidetone
More about this Keyer can be found in:
QRPKEY_H.ZIP = HEX-file you need for programming the PIC processor
QRPKEY_D.TXT = deutsche Bedienungsanleitung und Beschreibung
QRPKEY_E.TXT = english manual and description
QRPKEY_C.GIF = circuit diagram of the QRP PIC keyer
QRPKEY_P.GIF = pattern for a very small PCB (2.6cm*3.7 cm).
This is a single-sided circuit board.
Scale it down to 33% when printing this on film,
the copper area must be 3.7cm wide and 2.6cm high.
QRPKEY_S.GIF = SMD part placement on the copper plated bottom side.
The ZIP and GIF files are "seven plus"-coded.
Please don't ask me to send you programmed PICs or PCBs. Sorry, but I
can NOT (if someone else can, please drop us a line..).
You don't have to use a printed circuit board, the circuit is so easy
that you can also build the keyer "ugly style" on a small piece of
"raster type" PCB. You also don't need SMD parts that way. Take a look
at the circuit diagram, you may place the components similar to that.
You can find many simple PIC programmers everywhere, for example on this
excellent web site:
http://www.thepicarchive.cwc.net/dtpa/links.html
(This is a mirror site of Dave Tait's ex-PIC-homepage
with a lot of PIC-related goodies)
Fuer die Leser des deutschen Funkamateurs: Im FA Mai '98 stand ein recht
simpler PIC-Programmierer. Die dort genannte Adresse der Firma
Silicon Studio wo man sich die Programmiersoftware "PIP02" laden sollte
stimmt leider nicht mehr, neue Quelle siehe oben.
If your packet radio connection is as slow as mine, you may download all
files (and some more construction details and photos) on the internet:
www.qsl.net/dl4yhf/pic_key.html.
Good luck and have fun with this project. Life is long enough for QRP.
73's from DL4YHF (Wolfgang).
Read previous mail | Read next mail
| |