OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
DL4YHF > QRP      11.08.99 01:30l 58 Lines 2727 Bytes #-9959 (0) @ EU
BID : 108922DB0EAM
Read: OM3KII GUEST
Subj: QRP-Keyer: Info
Path: OE1XAB<OE3XPR<OE3XBS<S50BOX<S50MBL<IV3LAV<IV3AVQ<I4UKI<IW3HHD<I3NXU<
      IK2QCA<IW2FPO<HB9OK<HB9H<HB9OS<DB0ZKA<DB0ABH<DB0BOX<DB0MAK<DB0SON<
      DB0ERF<DB0NHM<DB0EAM
Sent: 990810/2045z @:DB0EAM.#HES.DEU.EU [Kassel DB8AS] LT:100 $:108922DB0EAM
de DL4YHF @ DB0EAM.#HES.DEU.EU   (Wolfgang)

to QRP @ EU

Short description of a homebrew "QRP keyer" with a PIC microcontroller
----------------------------------------------------------------------

This project describes the construction of a real "QRP" keyer
with a small microcontroller (PIC 16F84). This keyer features : 
- variable CW speed, adjustable via poti from 20 to 300 letters per minute
- two message-memories (50..64 letters), each controlled by a pushbutton
- command mode only required for setup and more complex features
- special modes like "endless" calling loop
   and automatic contest number generation
- very low power consumption: 50 microampere at 2.4 V supply when active,
   less than 1 microampere in standby mode (which is enterd automatically)
- simple circuit, can be built on PCB with less than "half matchbox size"
- dash/dot-memory can be turned on and off
   (I guess that's "Iambic mode A" and "B")
- Controller is clocked by a built-in RC-oscillator
   with only 50kHz clock frequency
- passive piezo speaker can be connected as sidetone
 
More about this Keyer can be found in:

  QRPKEY_H.ZIP = HEX-file you need for programming the PIC processor
  QRPKEY_D.TXT = deutsche Bedienungsanleitung und Beschreibung
  QRPKEY_E.TXT = english manual and description
  QRPKEY_C.GIF = circuit diagram of the QRP PIC keyer
  QRPKEY_P.GIF = pattern for a very small PCB (2.6cm*3.7 cm).
                 This is a single-sided circuit board.
                 Scale it down to 33% when printing this on film,
                 the copper area must be 3.7cm wide and 2.6cm high.
  QRPKEY_S.GIF = SMD part placement on the copper plated bottom side.


The ZIP and GIF files will be "seven plus"-coded. It will take an ugly
lot of time for me to upload these files (maybe one file per day), 
so be patient.
And please don't ask me to send you programmed PICs or PCBs. Sorry, but I 
can NOT (if someone else can, please drop us a line..).
You can find many simple PIC programmers everywhere, for example on this 
excellent web site:
   http://come.to.thepicarchive
  (This is a mirror site of Dave Tait's ex-PIC-homepage 
   with a lot of PIC-related goodies)

 Fuer die Leser des deutschen Funkamateurs: Im FA Mai '98 stand ein recht 
 simpler PIC-Programmierer. Die dort genannte Adresse der Firma
 Silicon Studio wo man sich die Programmiersoftware "PIP02" laden sollte
 stimmt leider nicht mehr, neue Quelle siehe oben.

If your packet radio connection is as slow as mine, you may download all
files (and some more construction details and photos) on the internet:
   www.qsl.net/dl4yhf/keyer1.htm.

Good luck and have fun with this project. Life is long enough for QRP.
73's from DL4YHF (Wolfgang).



Read previous mail | Read next mail


 16.11.2026 22:35:01lGo back Go up