| |
PA2TSL > QRP 11.06.99 18:34l 25 Lines 946 Bytes #-10020 (0) @ WW
BID : 410030PA2TSL
Read: DL2MHG GUEST
Subj: SGC-2020 output power specs
Path: DB0ZKA<DB0ABH<DB0SRS<DB0ZDF<DB0AIS<DB0NDK<DB0ACH<DB0ACC<DB0SM<PI8DAZ<
PI8GCB
Sent: 990611/1952Z @:PI8GCB.#NH2.NLD.EU #:37847 [Bussum] $:410030PA2TSL
From: PA2TSL@PI8GCB.#NH2.NLD.EU
To : QRP@WW
Hello, thanks for reading this mail.
I have a SGC-2020 HF transceiver which I am using now for 2 weeks.
I have tested this rig on several aspects, a.o. its max. output power.
It is specified for minimum 20 Watts on all bands.
I notice, however, that it does not deliver more than 13 W at the 10 m and
about 18 W at the 12 m HAM bands.
Are there some more amateurs who have encountered this? There is no way to
adjust the power, you can set it with the CMD and NB keys but this is only
useable when the power can be put out by the set. On 20 m it can be set to
its max. (25 W) without problems.
I have set it to 20 W which is sufficient for me, and I do not want to
stress the final stage.
For the rest it is a very nice small rig with very good performance.
I am looking forward to some comments,
73 - Tom, PA2TSL @ PI8GCB
Message timed: 18:46 on 11 Jun 99
Message sent using WinPack-PCF V6.42
Read previous mail | Read next mail
| |