OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
DK8KV  > QRP      14.05.99 12:38l 96 Lines 3495 Bytes #-10048 (0) @ DL
BID : 145907DB0MKA
Read: DL2MHG GUEST
Subj: K2 Firmware 1.02h
Path: DB0ZKA<DB0CRL<DB0TTM<DB0FP<DB0SRS<DB0ZDF<DB0LJ<DB0ACH<DB0MKA
Sent: 990514/1118z @:DB0MKA.#NRW.DEU.EU [HennefJO30PR DL3OE] $:145907DB0MKA
de DK8KV @ DB0MKA.#NRW.DEU.EU   (Walter)

to QRP @ DL

From: Wayne Burdick <n6kr@elecraft.com>
Date: Tue, 11 May 1999 20:39:18 -0700
Subject: [Elecraft] Final list of K2 firmware enhancements for production
Message-Id: <v03102802b35e9af045a5@[206.80.8.230]>



Hi all,

Here is a quick look at the final list of new K2 firmware features. The
firmware upgrade will be sent to field testers about the same time as the
production kits are shipped. Many thanks for all the suggestions, which
have come from both K2 builders and potential builders.

K2 FIRMWARE ENHANCEMENTS, MAY 11, 1999

GENERAL

- Low battery warning at about 10.5-10.9V; message flashed periodically

TRANSMIT

- Programmable transmit current limiting protects fuses, batteries, and
  finals if load impedance suddenly decreases; settable in 20mA steps
  (NOTE: this is in addition to the K2's new resettable thermal fuse)
- External keyer or computer can be connected along with keyer paddle
  (the "auto-detect" algorithm is now very reliable)
- Faster keying: up to 70WPM (external); int. keyer still 9-50WPM
- More CW message buffers; 9 buffers of over 150 bytes each
- One-button CW message chain and chain/repeat
- Programmable message repeat interval (0-255 seconds)
- Automatic word insertion during message record--allows you to pause

RECEIVE

- Up to four xtal filters can be set up per mode; FL2/3/4 can be turned off
- Filter status display via AFIL button (no need to cycle through filters)
- Scan resume function (from current frequency) can be assigned to PF1/PF2
- Scan lock time on strong signals is now 20 seconds (previously unlimited)
- CW normal/reverse sideband now stored per-band
- Dual RIT/XIT offset ranges (+/- 0.6 and +/- 1.2 kHz)

OPTION SUPPORT

- Ready for 160m/RXANT option, SSB adapter, ATU, NB, and host I/O
- Host I/O interface supports RIT clear and inc/dec (10Hz steps)
- Real-time clock display mode (w/host I/O adapter)


From: Wayne Burdick <n6kr@elecraft.com>
Date: Wed, 12 May 1999 08:20:52 -0700
Subject: [Elecraft] Re: Final list of K2 firmware enhancements for production
Message-Id: <v03102805b35f4b3ab51d@[206.80.8.230]>


Hi Niel,

>- RTC is w/host IO only correct ?  presume its 12/24 selectable ?

The RTC will be part of the host I/O adapter, and several different display
formats will be provided. The only catch is that you need to set the clock
using your computer. After that it will run without the computer connected
if you want.


>- Scan lock is not programable ?? ( 20 sec is great for 20wpm+, head copy
>but for a 10wpm copy while working on the other desk it may be a bit short...)

I can change this to 30 seconds if there's a general consensus on it, but I
can't make it programmable in this release of the firmware. Could go on the
wish list. The way I use scan is to hunt for stations that I might want to
call, and 20 seconds is long enough at moderate code speeds. I got another
opinion on the 20 second issue that was favorable, too. The way to tell if
this is long enough is to time yourself as you scan the band manually --
how long do you pause on each station?


>- Does the dual RIT range also equate to 1.2/2.4 if the associated hardware
>mod is not done on XC boards ?

It is not related to hardware at all -- no mod necessary. (You may be
thinking about the AGC mod.)


>- Host IO, is it the last option planned (currently planned ;-) ?

It may come out sooner than "last," but we haven't finalized the schedule.

Great questions!

Wayne
qsp de dk8kv



Read previous mail | Read next mail


 17.11.2026 02:45:50lGo back Go up