| |
ZL2BSJ > PSK31 09.01.02 23:25l 32 Lines 1371 Bytes #-8952 (0) @ WW
BID : 000004ZL2BSJ
Read: DG2NBN DK8NZ DL7NFK GUEST
Subj: Re^2: psk31 with ft1000mp
Path: DB0MRW<DB0ERF<DB0FBB<DB0GOS<ON0AR<ON0AR<7M3TJZ<HA3PG<ZL2TZE<ZL2TZE
Sent: 020109/2104Z @:ZL2TZE.#73.MLB.NZL.OC #:25182 [Blenheim] $:000004ZL2BSJ
From: ZL2BSJ@ZL2TZE.#73.MLB.NZL.OC
To : PSK31@WW
>>> LinPac 0.16pre9 : Message sent by ZL2BSJ: Date 01/10/2002 Time 8:50 loc.<<<
> M0BYM wrote:-
> > hello all jim m0bym im trying to setup psk31 with ft 1000mp using
> > packet port on back in afsk im also using pk 232 mbx with psk31 unit
> > installed but haven,t quite worked out how to get the rig to transmit
> > using psk31 with the pk232 mbx and the upgrade psk31 unit if anyone
> > can help it would be appreciated hope to hr from you soon jim m0bym
> Usually it's an accessory socket for rtty units etc, should be in the
> manual, I have only used on Yaesu for psk ( ft 920 ) and afsk tones had to
> go through the phone patch.
The MP will take audio PSK via the 'packet' socket. You'll also need to put
the rig in 'packet' mode, with the mode switch at the front. You'll be using
LSB, when you do this.
The MP can be made to read true mark (or in the case of PSK: true carrier)
by programming menu 6.4 or 6.5 (I forget which). In addition, you will have
to select the correct audio passband so that your PSK tone sits nicely in
the middle of it (either 6.5 or 6.4). It really helps to have your PSK audio
in the passband of the TX IF :-)
It may be worth using AFC if your controller or sound card software offers it.
The MP will drift up to 60 Hz with the standard oscillator unit.
Wilbert, ZL2BSJ
Read previous mail | Read next mail
| |
