| |
G0FTD > PSION 10.05.04 00:02l 57 Lines 2106 Bytes #999 (0) @ WW
BID : 105287G0FTD
Read: GUEST OM5FA DG0LWG
Subj: Psion Revo packet
Path: DB0FHN<DB0RGB<DB0MRW<DB0WUE<DK0WUE<DB0RES<ON0AR<7M3TJZ<HA3PG<IK1ZNW<
GB7CRV<GB7CIP<GB7SXE
Sent: 040509/1943Z @:GB7SXE.#38.GBR.EU #:47432 [Hastings] FBB7.00i $:105287G0FT
From: G0FTD@GB7SXE.#38.GBR.EU
To : PSION@WW
For those of you who have a Psion Revo and want to use it on packet here
is the pin outs.
Below is the pin outs for making a null modem adapter for the Psion Revo
to connect up a packet radio tnc. This *works fine* for me with a Tiny 2
and a copy of PocPag by G0HZK.I believe the same adapter will allow a GPS
or phone modem to be connected direct to the Revo docking station but I
have not tried it.
I have also successfully used the XTM DOS Emulator available from the
internet and run Paket 6.1/6.2 and even BPQ with it.
The superior node/aprs-ax25-tcpip-router with basic PMS DOS system called
XROUTER from G8PZT run fine on the XTM system/Psion too ! (www.g8pzt.org)
I built my adapter (applicable to the UK) with parts from Maplin
Electronics. They can for 99 pence supply a D-TYPE box that houses the
two d-types and the actual d-type connectors are approx 1 UKP. Cheap.
[9PIN D-TYPE MALE] [9PIN D-TYPE FEMALE]
PIN(1)------------------------------------------(PIN7 & 8)
PIN(2)------------------------------------------(PIN 3 )
PIN(3)------------------------------------------(PIN 2 )
PIN(4)------------------------------------------(PIN 6 )
PIN(5)------------------------------------------(PIN 5 )
PIN(6)------------------------------------------(PIN 4 )
PIN(7 & 8)--------------------------------------(PIN 1 )
| REVO | | NULL || 9 PIN |
| DOCKING |>>>CABLE>| MODEM || O N |
| CRADLE | | ADAPTER|| T N C |
Enjoy your portable packet !
Tested and used by G0FTD.
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ 73 - Andy ³
³ G0FTD ³
³ Whitstable, Kent ³
³ Winpack-AGW ³
³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³
³ ³ Û ³ ³
ÀÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÙ
Read previous mail | Read next mail
| |
