| |
G0FTD > PSION 10.08.03 23:10l 271 Lines 7252 Bytes #999 (0) @ EU
BID : 5E1676G0FTD
Read: GUEST DB0FHN
Subj: Revo >>> mobile telephone info
Path: DB0FHN<DB0RGB<DB0MRW<DB0SON<DB0SIF<DB0CWS<DB0ZDF<DB0LJ<LX0HST<HA3PG<
CT2GWY<GB7YKS<GB7MAX<GB7COV<GB7YFS<GB7CIP<GB7SXE
Sent: 030810/1704Z @:GB7SXE.#38.GBR.EU #:12743 [Hastings] FBB7.00i $:5E1676G0FT
From: G0FTD@GB7SXE.#38.GBR.EU
To : PSION@EU
============================================
Series 5(mx)/Revo - "Control Panel / Modems"
Settings for some Mobile Phones
============================================
------------------
ERICSSON 888, 320 phones
ERICSSON DI27, DI28 Infrared modems
------------------
Name - Ericsson
Speed - 57600
Connect - Infrared
Fax Class - Auto
------------------
Init (reset) - ATZ
Data - (blank)
Fax - (blank)
------------------
Flow - Hardware (RTS/CTS)
Terminal (DSR/DTR) [ ] not checked
Carrier (DCD) [ ] not checked
Type - Mobile
Note 1: With the 5mx/MC218 *only* &
R320 phone, the "Mobile Connectivity Update"
should be installed. This can be downloaded
from the Series 5(mx) page of my website -
http://www.mikemcc.net
Note 2: With the T20 phone and DI28 modem,
some users have found it necessary to use
a "Fixed line" setting instead of "Mobile"
to be able to connect.
------------------
ERICSSON T39
------------------
Name - Ericsson T39
Speed - 115200
Connect - Infrared
Fax Class - 2
------------------
Init (reset) - ATZ
Data - AT&F
Fax - ATS0=2
------------------
Flow - Hardware (RTS/CTS)
Terminal (DSR/DTR) [X] checked
Carrier (DCD) [X] checked
Type - Mobile
Note: With the 5mx/MC218 *only* &
T39 phone, the "Mobile Connectivity Update"
should be installed. This can be downloaded
from the Series 5(mx) page of my website -
http://www.mikemcc.net
-------------------------------------------------
SIEMENS S25 (but see alternative settings below)
SIEMENS C35 M35 S35
-------------------------------------------------
Name - Siemens
Speed - 115200 with IR; 19200 with Serial cable
Connect - Infrared (S25/S35) Serial (C35/M35)
Fax Class - Auto
------------------
Init (reset) - AT&F
Data - AT\Q1
Fax - (blank)
------------------
Flow - Software (Xon/Xoff)
Terminal (DSR/DTR) [ ] not checked
Carrier (DCD) [ ] not checked
Type - Mobile
Note: It is important when connecting by Serial Cable
to use a Port speed of 19200. This also applies when
using the phone with a PC.
-----------------------------------
SIEMENS S25 (alternative settings)
-----------------------------------
Name - S25
Speed - 115200
Connect - Infrared
Fax Class - 1
------------------
Init (reset) - AT&F0X3\Q0
Data - (blank)
Fax - (blank)
------------------
Flow - Hardware (RTS/CTS)
Terminal (DSR/DTR) [X] checked
Carrier (DCD) [ ] not checked
Type - Fixed line (yes, despite being a mobile phone)
Note: With Modem type set as "Fixed line" sending and
receiving SMS messages with the Psion will not be
possible. Change the setting to "Mobile" temporarily to
use SMS.
--------------------------------------------------------
NOKIA "Generic Settings"
including....7110, 8210, 8810, 8850, 6210
(see also settings below for 7110e at 14.4kbps on Orange
and for 6210e at up to 28.8kbps on Orange)
--------------------------------------------------------
Name - Nokia
Speed - 57600
Connect - Infrared
Fax Class - Auto
------------------
Init (reset) - AT&F&K4
Data - (blank)
Fax - (blank)
------------------
Flow - Software (Xon/Xoff)
Terminal (DSR/DTR) [ ] not checked
Carrier (DCD) [ ] not checked
Type - Mobile
-------------------------------------------------
NOKIA 7110e running at 14.4kbps on Orange Network
-------------------------------------------------
Name - Nokia 7110e
Speed - 57600
Connect - Infrared
Fax Class - Auto
------------------
Init (reset) - AT&F&K4
Data - AT+CBST=14
Fax - (blank)
------------------
Flow - Software (Xon/Xoff)
Terminal (DSR/DTR) [ ] not checked
Carrier (DCD) [ ] not checked
Type - Mobile
Note: If the 7110e starts giving problems after a seemingly
trouble-free period of data access by IrDa, use Psion "Comms"
to connect to the 7110e, and type "ATZ <enter>" twice, followed
by "AT&F" <enter>" once.
-------------------------------------------------------
NOKIA 6210e running at up to 28.8kbps on Orange Network
(these settings will "autobaud" and establish the
fastest connection speed possible)
-------------------------------------------------------
Name - Nokia 6210e
Speed - 57600
Connect - Infrared
Fax Class - Auto
------------------
Init (reset) - AT&F&K4
Data - AT+CBST=0,0,1
Fax - (blank)
------------------
Flow - Software (Xon/Xoff)
Terminal (DSR/DTR) [ ] not checked
Carrier (DCD) [ ] not checked
Type - Mobile
-------------------------------------------------------
NOKIA 6210e running at 28.8kbps on Orange Network
(these settings will "force" a 28.8 connection and,
if this cannot be achieved, will drop the line)
-------------------------------------------------------
Name - Nokia 6210e
Speed - 115200
Connect - Infrared
Fax Class - Auto
------------------
Init (reset) - AT&F&K4
Data - ATS35=7+CBST=48,0,1
Fax - AT&S&K4
------------------
Flow - Software (Xon/Xoff)
Terminal (DSR/DTR) [ ] not checked
Carrier (DCD) [ ] not checked
Type - Mobile
-----------------------------------------------------
NOKIA 6210 - HSCSD Settings
(General HSCSD settings using a V110 ISDN connection.
-----------------------------------------------------
The High Speed Circuit Switched Data technology implemented
in the Nokia 6210 can only be used when your operator has
equipped its network with HSCSD equipment. Check with your
network operator first before trying the modem settings below.
Modem settings for 28.8 kbps ISDN V.110:
Name - Nokia 6210
Speed - 57600 bps
Connect via - Infrared
Fax class - Auto
------------------
Init (reset) - AT&F&K4+CBST=80
Data - (blank)
Fax - (blank)
------------------
Flow - Software (Xon/Xoff)
Terminal (DST/DTR) [X] checked
Carrier (DCD) [X] checked
Type - Mobile
---------------------------
Motorola L7089, P7389, T250
---------------------------
Name - Motorola
Speed - 115200
Connect - Infrared
Fax Class - Auto
------------------
Loudspeaker - Until call answered
Volume - Quiet
Pause time for "," - 4 secs
------------------
Init (reset) - AT&F&K5
Data - (blank)
Fax - (blank)
------------------
Flow - Software (Xon/Xoff)
Terminal (DSR/DTR) [ ] not checked
Carrier (DCD) [ ] not checked
Type - Mobile
Note: On the L7089 phone, make sure that
keypad tones are set to "On" and the "Normal"
setting. The settings in the "Options" tab
also seem to be important.(It has been suggested
that, as an alternative to having the keypad tones
enabled, connections will work if the Psion is
actively dialling *before* IR is enabled on the
phone. It may be a matter of "trial and error")
Note: Fax is not possible with a Psion and
the Motorola phone.
-------------
General Note:
-------------
Fluorescent lights can interfere with IR communication
between the Psion and a mobile phone. Some users have found
that their Psion and phone work OK at home but won't work
in the office - this may be the reason.
-------------
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ 73 - Andy ³
³ G0FTD ³
³ Psion Revo owner ³
³Msg sent 10-08-2003³
³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³
³ ³ Û ³ ³
ÀÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÙ
Read previous mail | Read next mail
| |
