| |
2E1HJX > MOD 27.09.99 01:14l 18 Lines 599 Bytes #999 (0) @ EU
BID : 5600062E1HJX
Read: GUEST
Subj: PMR HLP PLS
Path: DB0AAB<DB0FSG<DB0PV<DB0MAK<DB0RGB<OK0PPL<OK0PAD<OK0PKL<OK0PPR<OK0PJI<
OM0PBB<SR9ZAA<PP5BLU<XE3CRC<7M3TJZ<GB7PLY<GB7IPN<GB7TJF<GB7YEO<GB7BNM<
GB7GLO<GB7WAR<GB7COV<GB7COV<LWBBBS<GB7LWB<GB7BEN
Sent: 990926/0840Z @:GB7BEN.#43.GBR.EU #:15226 [Bletchley] $:5600062E1HJX
From: 2E1HJX@GB7BEN.#43.GBR.EU
To : MOD@EU
Thank you for reading this! I've just purchased a Pye M296 PMR Radio and
want to convert it for use on packet radio. As it is at the moment Tx freq
459.675Mhz and the Rx freq is 453.175Mhz. It works fine with about 18
Watts output. I need for it to Tx/Rx on 432.650Mhz and the power output to
be turned down anywhere between 5/10 Watts. Any help will be very
gratefully recieved. Thanks in advance! 73's all the best Carl>>>
73 - Carl, 2E1HJX @ GB7BEN
73 - Carl, 2E1HJX @ GB7BEN
Message timed: 08:35 on 25 Sep 99
Message sent using WinPack-AGW V6.4
Read previous mail | Read next mail
| |
