| |
PA2AGA > PACDIG 09.02.99 02:33l 113 Lines 3421 Bytes #-9961 (0) @ EU
BID : PR_99_25
Read: GUEST
Subj: PacketRadioDigest 99/25
Path: DB0AAB<DB0ZKA<DB0LX<DB0RBS<DB0SEL<DB0ZDF<DB0SRS<DB0SIF<DB0HSK<PI8DRS<
PI8DAZ<PI8GCB<PI8WFL<PI8VNW
Sent: 990208/2017Z @:PI8VNW.#ZH2.NLD.EU #:19487 [HvHolland] FBB7.00g $:PR_99_25
From: PA2AGA@PI8VNW.#ZH2.NLD.EU
To : PACDIG@EU
Received: from pa2aga by pi1hvh with SMTP
id AA14388 ; Mon, 08 Feb 99 19:59:40 UTC
Received: from pa2aga by pa2aga (NET/Mac 2.3.67/7.5.3) with SMTP
id AA00012373 ; Mon, 08 Feb 99 20:34:46 MET
Date: Mon, 08 Feb 99 20:32:04 MET
Message-Id: <pr_99_25>
From: pa2aga
To: pr_broadcast@pa2aga
Subject: PacketRadioDigest 99/25
X-BBS-Msg-Type: B
Packet-Radio Digest Mon, 8 Feb 99 Volume 99 : Issue 25
Today's Topics:
BayPac TNC and fast serial ports
Hardware-Howto
Need info from Alinco DR-1200T Svc Manual
Send Replies or notes for publication to: <Packet-Radio@UCSD.Edu>
Send subscription requests to: <Packet-Radio-REQUEST@UCSD.Edu>
Problems you can't solve otherwise to brian@ucsd.edu.
Archives of past issues of the Packet-Radio Digest are available
(by FTP only) from ftp.UCSD.Edu in directory "mailarchives/packet-radio".
We trust that readers are intelligent enough to realize that all text
herein consists of personal comments and does not represent the official
policies or positions of any party. Your mileage may vary. So there.
Loop-Detect: Packet-Radio:99/25
----------------------------------------------------------------------
Date: 8 Feb 1999 03:03:31 GMT
From: kb7vkl@aol.com.NOSPAM (KB7VKL)
Subject: BayPac TNC and fast serial ports
Has anyone besides me had trouble getting their serial port to talk to
their BayPac TNC ? My BayPac will key the radio but won't exchange
data with a known working packet BBS. The BBS doesn't even hear
my BayPac. I'm using the BayCom v1.6 software and a P100 computer
with 15550 serial ports. The software and TNC have been tested and
proved to work on a friends system. I've run the software under DOS
for Win'95 by restarting the computer in DOS safe mode, I've also
booted the machine in DOS v6.22 and got the same results on both
operating systems.
Any hints as to what I should do next?
TIA.
Bill
>.
------------------------------
Date: Sun, 7 Feb 1999 20:40:07 +0100
From: "Hans-Henrik Andresen" <hha@imh.dk>
Subject: Hardware-Howto
Thank you
/HHA
-----------
KC7ZRU <73KC7ZRU73@cyberhighway.net> skrev i meddelelsen
<36B9008F.F172B111@cyberhighway.net>...
>Hans,
>
>Www.packetradio.org/index.html, www.PacketRadio.com or www.tapr.org are
>good start points.
..
..
..
>.
------------------------------
Date: Sun, 07 Feb 1999 13:18:37 -0800
From: Bob Morehouse <bobmore@mail.pacifier.com>
Subject: Need info from Alinco DR-1200T Svc Manual
A friend of mine was doing the 9600 baud mod on an Alinco DR-1200 data
radio, then decided he wanted to 'un-mod' it back to 1200. In the
process, surface mount capacitor C40 has been damaged. This is on the
bottom board, just slightly left of the gold screw that holds down the
right side of the board. If there's someone out there with a service
manual for this rig who can look up the value of C40 and email that info
to me, I would appreciate it very much. One end of this smd has lost
that part which allows you to solder it to the board, and the radio does
not send any data when transmitting.
Bob, KB7ADO
>.
------------------------------
End of Packet-Radio Digest V99 #25
******************************
You can send in your contribution to this digest by
sending an e-mail to: packet-radio@pa2aga.ampr.org
or (via BBS-net) to: praga@pi8vnw.#zh2.nld.eu
Read previous mail | Read next mail
| |
