| |
PA2AGA > PACDIG 12.08.00 18:07l 199 Lines 6072 Bytes #999 (0) @ EU
BID : PR_2000_201
Read: GUEST
Subj: PacketRadioDigest 2000/201
Path: DB0AAB<DB0SL<DB0RGB<OK0PPL<OK0PPR<OK0PJI<OM0PBB<SR9ZAA<EC1L<EA7URC<
PE1NMB<PI8WFL<PI8HGL
Sent: 000812/1331Z @:PI8HGL.#ZH1.NLD.EU #:4361 [Den Haag] FBB $:PR_2000_201
From: PA2AGA@PI8HGL.#ZH1.NLD.EU
To : PACDIG@EU
Date: Sat, 12 Aug 00 14:39:14 MET
Message-Id: <pr_2000_201>
From: pa2aga@pe1mvx.ampr.org
To: pr_broadcast@pa2aga.ampr.org
X-BBS-Msg-Type: B
Packet-Radio Digest Sat, 12 Aug 2000 Volume 2000 : Issue 201
Today's Topics:
Amateur Search Engine
Baycom BP1? (2 msgs)
can not find??? look here 505
Update website PI4KML
WINFBB and BPQ32 help?
Send Replies or notes for publication to: <Packet-Radio@UCSD.Edu>
Send subscription requests to: <Packet-Radio-REQUEST@UCSD.Edu>
Problems you can't solve otherwise to brian@ucsd.edu.
Archives of past issues of the Packet-Radio Digest are available
(by FTP only) from ftp.UCSD.Edu in directory "mailarchives/packet-radio".
We trust that readers are intelligent enough to realize that all text
herein consists of personal comments and does not represent the official
policies or positions of any party. Your mileage may vary. So there.
Loop-Detect: Packet-Radio:2000/201
----------------------------------------------------------------------
Date: Sat, 12 Aug 2000 01:31:42 -0400
From: "web master" <1gws@surfsouth.com>
Subject: Amateur Search Engine
Check out the dedicated amateur radio search and help spread the word. Its
database is growing daily.
www.hamfind.com
------------------------------
Date: 11 Aug 2000 12:54:48 GMT
From: history67@aol.comTRASH (History67)
Subject: Baycom BP1?
>Subject: Re: Baycom BP1?
>From: Jim kb9mmcNOkbSPAM@juno.com.invalid
>
>Hi Sean:
>
>I'm use both a BP-1 and a BP-2M over here. Fire away with your
>question if I can't I'm sure someone else here can help you out.
>
I am using the BP-1 with an AST 486 laptop ( win95) and I have tried an
HTX-202 HT, a HTX 212 Mobile. and a Yeasu FT-530 and am still having
difficulty getting the system to transmit. The wires are correct, and it
receives just fine, but when the computer says it is sending, the radios did
not transmit. I tried the tone test and there is no high or low tone at all,
the manual is of little help. any hints?
Also, i have installed it over 6 times, but when I enter Baycom, it displays
the G0xxx callsign, I even looked in the ssc.ini files, and it had my proper
call ,
???
Thanks
Sean
>>>>>" It's Never too late to be what you might have been"<<<<<<
Elliot
" It's Never enough until your Heart Stops Beating"
new order
------------------------------
Date: Fri, 11 Aug 2000 20:45:09 -0700
From: Jim <kb9mmcNOkbSPAM@juno.com.invalid>
Subject: Baycom BP1?
You may want to try this for a wiring hook-up. The guy that I
bought my BP-1 from had it wired this way for his radio. He had
some type of problem with his radio at first also, I can't be
sure that this will work.
Green - Speaker
Black - Ground
Yellow - Mic Input
He had the Green hooked up to the center pin for the speaker.
Black was hooked up to the ground lead on the mic plug and the
mic input to the center pin of the mic plug. The yellow wire was
also jumped over for the ground on the speaker.
Another thing is the Baycom People say that the TNC with their
software will not work in windows, you stated that you were
runnig under windows 95, have you tried to run under DOS? Just a
thougt before you do the rewiring discribed above. Also are you
running version 1.6 software?
Jim
Growing up is optional, Growing old isn't!!
-----------------------------------------------------------
Got questions? Get answers over the phone at Keen.com.
Up to 100 minutes free!
http://www.keen.com
------------------------------
Date: Fri, 11 Aug 2000 16:59:51 GMT
From: fxpdyr@usa.net
Subject: can not find??? look here 505
You still not found what you are looking for?????
you will find it here......several online shops
http://www.angelfire.com/journal/businesssite/
dxujjtbsgkshcodkts
------------------------------
Date: Sat, 12 Aug 2000 10:31:39 +0200
From: "PA3ESZ" <pa3esz@wxs.nl>
Subject: Update website PI4KML
Dr OM/(X)YL
Zo ongeveer telijkertijd met het verschijnen van het nieuwe nummer van Hot
Lines Magazine (het "periodiek" van de VERON afd. Kennemerland) heb ik ook
de website van deze afdeling weer volledig bijgewerkt.
Zoals gebruikelijk heb ik de bijgewerkte informatie (bestuursperikelen,
agenda voor de komende maanden, etc.) gemerkt, zodat vernieuwde info meteen
opvalt.
Daarnaast is op de site een zoekroutine opgenomen die op de website zelf
zoekt. Kortom, na het ingeven van een trefwoord is de relevantie info (voor
zover aanwezig) ook snel gevonden.
Tenslotte: sinds kort beschikt de VERON afd. Kennemerland ook over een eigen
domeinnaam.
De website is daardoor opvraagbaar via http://www.pi4kml.net en uiteraard
ook nog via de (oude) gebruikelijke URI http://www.qsl.net/pi4kml
Graag tot ziens op de site !!
Best 73 es cu
Hans - PA3ESZ
webmaster PI4KML
pa3esz@wxs.nl pa3esz@amsat.org pa3esz@qsl.net
http://home.wxs/nl/~pa3esz http://www.qsl.net/pa3esz
NIEUW: nu ook http://www
------------------------------
Date: Fri, 11 Aug 2000 18:40:46 +0100
From: Steve <Grrrreatbig@dogsdanglies.co.uk>
Subject: WINFBB and BPQ32 help?
Hi, I am trying to run the winFBB V7.00 software on my P200 , but the
FBB never can see the switch. I have tried loading the 32bit BPQ and
the older BPQCODE TSR switch, but no good. FBB always gives up on
finding the driver (BPQ). Even in the same directory etc - no good. I
can run BPQCODE and DOS FBB7 in a window under windows 95, or even in
real DOS with no problems. What is the problem with winFBB and BPQ???
Any help very much appreciated...
Steve
steve.m1bjr@nospamplease.ntlworld.com
remove "nospam from email before replying"
------------------------------
End of Packet-Radio Digest V2000 #201
******************************
You can send in your contribution to this digest by
sending an e-mail to: packet-radio@pa2aga.ampr.org
or (via BBS-net) to: praga@pi8vnw.#zh2.nld.eu
Read previous mail | Read next mail
| |
