| |
PA2AGA > PACDIG 02.07.00 23:37l 176 Lines 4756 Bytes #-9399 (0) @ EU
BID : PR_2000_160B
Read: GUEST
Subj: PacketRadioDigest 2000/160B
Path: DB0AAB<DB0KFB<DB0CZ<F6KFG<DB0GE<DB0HOM<DB0RBS<DB0SWR<DB0HBN<DB0SON<
DB0ERF<DB0SHG<DB0SM<PI8DAZ<PI8GCB<PI8HGL
Sent: 000702/1541Z @:PI8HGL.#ZH1.NLD.EU #:57656 [Den Haag] FBB $:PR_2000_160B
From: PA2AGA@PI8HGL.#ZH1.NLD.EU
To : PACDIG@EU
Date: Sun, 02 Jul 00 14:23:19 MET
Message-Id: <pr_2000_160B>
From: pa2aga@pe1mvx.ampr.org
To: pr_broadcast@pa2aga.ampr.org
X-BBS-Msg-Type: B
Subject: KAM+ problem
I've got a KAM+ (version 8.2 firmware) and every time I shut it off (whether
for a few minutes, or 'inadvertantly' as in when a Florida thunderstorm
glitches the power), I LOOSE ALL MY SETTINGS! All messages dissappear from
the PBBS, the KAM reverts to autobaud mode, and even looses my callsign!
(Yes, it also comes up in 'new user' mode too).
I only bought the thing a couple of years ago, so I can't believe the batt.
is dead.
I've looked in the manual several times, for a battery 'jumper', and can't
find one. I've also looked for some sort of setting that might need to be
changed, to prevent this.
Any ideas?
73 and thanks in advance
Joe
wd4kav@earthlink.com
------------------------------
Date: 30 Jun 2000 20:48:41 GMT
From: mogens9181@aol.com (Mogens9181)
Subject: KAM+ problem
I don't know about the rest, but your call sign should be permed in the eprom.
73,
C. Jespersen K2OG
------------------------------
Date: Fri, 30 Jun 2000 16:44:54 -0500
From: "Rick Ruhl" <ricker@cssincorp.com>
Subject: KAM+ problem
This does sound like a bad backup battery. Have you talked to Ken at
Kantronics? I'm sure he can verify this.
--
Rick Ruhl
President, Creative Services Software
http://www.cssincorp.com
"Joe Burnham" <wd4kav@earthlink.net> wrote in message
news:av375.22009$_b3.475352@newsread1.prod.itd.earthlink.net...
> I've got a KAM+ (version 8.2 firmware) and every time I shut it off (whether
> for a few minutes, or 'inadvertantly' as in when a Florida thunderstorm
> glitches the power), I LOOSE ALL MY SETTINGS! All messages dissappear from
> the PBBS, the KAM reverts to autobaud mode, and even looses my callsign!
> (Yes, it also comes up in 'new user' mode too).
>
> I only bought the thing a couple of years ago, so I can't believe the batt.
> is dead.
>
> I've looked in the manual several times, for a battery 'jumper', and can't
> find one. I've also looked for some sort of setting that might need to be
> changed, to prevent this.
>
> Any ideas?
>
> 73 and thanks in advance
> Joe
> wd4kav@earthlink.com
>
>
------------------------------
Date: Fri, 30 Jun 2000 13:57:17 GMT
From: Gary Danaher <gdanaher@home.com>
Subject: KAM PLUS
Contact www.kantronics.com and check on a rom upgrade.
Patrick Stever wrote:
> Hopefully this newsgroup won't die out until I can possibly get an
> answer to a question!
>
> I recently acquired a KAM PLUS TNC from some one who wasn't using it.
> I noted that the manual is dated April 1993. Nowhere does it state
> that it can operate G-TOR. Do I need to install a daughter board in
> this TNC in order to be able to have G-TOR?
>
> I'm not at all familiar with the KAM equipments as I've been using a
> PK-232 since 1987!!
>
> Thanks for any info....
>
> Pat - VE3PZ
------------------------------
Date: Fri, 30 Jun 2000 14:47:51 -0700
From: PreCool <precoolNOprSPAM@email.com.invalid>
Subject: Looking for a way to recive packet on my scaner!!
Of course you'll have to set AGW by right clicking it after you
runn it. Start by set port and speed to 1200. Be sure to
pick "soundcard" too. Then as it says, close it and restart
(AGW).
-----------------------------------------------------------
Got questions? Get answers over the phone at Keen.com.
Up to 100 minutes free!
http://www.keen.com
------------------------------
Date: Fri, 30 Jun 2000 14:28:24 -0700
From: PreCool <precoolNOprSPAM@email.com.invalid>
Subject: Looking for a way to recive packet on my scaner!!
Just run your scanners speaker-out into a soundcards Line-In
(left *or* right channel). Then run AGW. Ajust levels and your
in business for recieve. I've had some lock up problems with
AGW. Hopefully you will not. If you do then go with FlexNet.
In any case the physical connection for receive is greatly
simplified.
http://www.raag.org/sv2agw/
http://www.afthd.tu-darmstadt.de/~flexnet/index.html
73
-----------------------------------------------------------
Got questions? Get answers over the phone at Keen.com.
Up to 100 minutes free!
http://www.keen.com
------------------------------
Date: Fri, 30 Jun 2000 20:51:47 +0200
From: Frank van Klaveren <f.klaveren@planet.nl>
Subject: PacketWebcams
Hello,
If you are interested in packet-radio and webcams, please visit
http://go.to/packetwebcams
Frank
------------------------------
End of Packet-Radio Digest V2000 #160
******************************
You can send in your contribution to this digest by
sending an e-mail to: packet-radio@pa2aga.ampr.org
or (via BBS-net) to: praga@pi8vnw.#zh2.nld.eu
Read previous mail | Read next mail
| |
