| |
PA2AGA > PACDIG 02.11.99 01:36l 73 Lines 2428 Bytes #-9674 (0) @ EU
BID : PR_99_269
Read: DL6KCF GUEST
Subj: PacketRadioDigest 99/269
Path: DB0AAB<DB0KFB<DB0CZ<DB0GE<DB0HOM<DB0ZDF<DB0AIS<DB0NDK<DB0ACH<DB0ACC<
PI8DRS<PI8ZWL<PI8APD<PI8WNO<PI8HGL<PE1NMB<EA7URC<PE0MAR<PI8VNW
Sent: 991101/2001Z @:PI8VNW.#ZH2.NLD.EU #:12246 [HvHolland] FBB7.00g $:PR_99_26
From: PA2AGA@PI8VNW.#ZH2.NLD.EU
To : PACDIG@EU
Received: from pa2aga by pi1hvh with SMTP
id AA22381 ; Mon, 01 Nov 99 19:39:57 UTC
Received: from pa2aga by pa2aga (NET/Mac 2.3.67/7.5.3) with SMTP
id AA00016704 ; Mon, 01 Nov 99 19:16:53 MET
Date: Mon, 01 Nov 99 19:14:11 MET
Message-Id: <pr_99_269>
From: pa2aga
To: pr_broadcast@pa2aga
Subject: PacketRadioDigest 99/269
X-BBS-Msg-Type: B
Packet-Radio Digest Mon, 1 Nov 99 Volume 99 : Issue 269
Today's Topics:
KPC3 & TM 241A (3 msgs)
Latest Inkjetz Available
Send Replies or notes for publication to: <Packet-Radio@UCSD.Edu>
Send subscription requests to: <Packet-Radio-REQUEST@UCSD.Edu>
Problems you can't solve otherwise to brian@ucsd.edu.
Archives of past issues of the Packet-Radio Digest are available
(by FTP only) from ftp.UCSD.Edu in directory "mailarchives/packet-radio".
We trust that readers are intelligent enough to realize that all text
herein consists of personal comments and does not represent the official
policies or positions of any party. Your mileage may vary. So there.
Loop-Detect: Packet-Radio:99/269
----------------------------------------------------------------------
Date: Sun, 31 Oct 1999 15:07:09 -0600
From: Cliff <cliffsir@airmail.net>
Subject: KPC3 & TM 241A
I am trying to set up for packet on 2 meter. KPC3 with 8.3 firmware and
a Kenwood 241a.
Problem is the wiring from tnc to radio. From the KPC manual and a few
packet web sites the wiring is correct. But when the tnc is connected to
the radio the radio is in Transmit with nothing showing the tnc in
transmit.
Any suggestion would be appreciated.
Thanks Cliff
>.
------------------------------
Date: Sun, 31 Oct 1999 23:20:42 +0000
From: "D. Stussy" <kd6lvw@bde-arc.ampr.org>
Subject: KPC3 & TM 241A
On Sun, 31 Oct 1999, Cliff wrote:
> I am trying to set up for packet on 2 meter. KPC3 with 8.3 firmware and
> a Kenwood 241a.
> Problem is the wiring from tnc to radio. From the KPC manual and a few
> packet web sites the wiring is correct. But when the tnc is connected to
> the radio the radio is in Transmit with nothing showing the tnc in
> transmit.
Check for a solder bridge at the connectors. On the radio side, especially
check pins 2 & 8.
You can send in your contribution to this digest by
sending an e-mail to: packet-radio@pa2aga.ampr.org
or (via BBS-net) to: praga@pi8vnw.#zh2.nld.eu
Read previous mail | Read next mail
| |
