| |
PA2AGA > PACDIG 05.05.99 06:08l 278 Lines 7561 Bytes #-9873 (0) @ EU
BID : PR_99_98A
Read: GUEST
Subj: PacketRadioDigest 99/98A
Path: DB0AAB<DB0ZKA<DB0ABH<DB0SRS<DB0SIF<DB0HSK<PI8DRS<PI8DAZ<PI8GCB<PI8HGL<
PI8VNW
Sent: 990505/0130Z @:PI8VNW.#ZH2.NLD.EU #:3882 [HvHolland] FBB7.00g $:PR_99_98A
From: PA2AGA@PI8VNW.#ZH2.NLD.EU
To : PACDIG@EU
Received: from pa2aga by pi1hvh with SMTP
id AA16024 ; Wed, 05 May 99 01:06:38 UTC
Received: from pa2aga by pa2aga (NET/Mac 2.3.67/7.5.3) with SMTP
id AA00013485 ; Wed, 05 May 99 02:46:28 MET
Date: Wed, 05 May 99 02:34:24 MET
Message-Id: <pr_99_98A>
From: pa2aga
To: pr_broadcast@pa2aga
Subject: PacketRadioDigest 99/98A
X-BBS-Msg-Type: B
Packet-Radio Digest Tue, 4 May 99 Volume 99 : Issue 98
Today's Topics:
AGW and Soundcard Problem
cmsg cancel <7gk68k$m5a$13496@news.ctimail.com> ignore no reply
DOS Packet Software
English > Portuguese (3 msgs)
Multiplexers?
Packet
Packet in Plano Texas
Packet map (2 msgs)
TM 11-2715, Installation of Radio Sets in Military Jeeps
Send Replies or notes for publication to: <Packet-Radio@UCSD.Edu>
Send subscription requests to: <Packet-Radio-REQUEST@UCSD.Edu>
Problems you can't solve otherwise to brian@ucsd.edu.
Archives of past issues of the Packet-Radio Digest are available
(by FTP only) from ftp.UCSD.Edu in directory "mailarchives/packet-radio".
We trust that readers are intelligent enough to realize that all text
herein consists of personal comments and does not represent the official
policies or positions of any party. Your mileage may vary. So there.
Loop-Detect: Packet-Radio:99/98
----------------------------------------------------------------------
Date: Mon, 3 May 1999 10:17:20 -0500
From: "JayC Daniel" <jayc@pov.net>
Subject: AGW and Soundcard Problem
I am having a problem with the AGW system and my sound card. I just want to
monitor
packet not transmit.
I have my receiver hooked up to my system and can clearly hear 1200 buad
packet over
the speakers and can record it using the sagebrush vox recorder.
I have installed the agw main and monitor packages. And setup a 1200 buad
SoundCard
TNC. I go to the monitor program and can hear the packet on my receiver but
see
_nothing_ on the screen.
Here are the basics of my system:
PII-300
128 megs of ram.
Serial port is turned off (not sure if this is important since I don't want
to transmit)
PRO-2066 receiver
Freq: 144.93
JayC Daniel
>.
------------------------------
Date: Mon, 03 May 1999 12:52:45 +0000
From: andrew@erlenstar.demon.co.uk
Subject: cmsg cancel <7gk68k$m5a$13496@news.ctimail.com> ignore no reply
Spam (EMP) cancelled - type=LCBOT
Cancel ID: 9P-7+-;I9;:($JZP=(?I#9<SAUP&&97FN$+>X*2W&3W'8[>,-DG%%NAR
>.
------------------------------
Date: Tue, 27 Apr 1999 13:44:19 -0600
From: Tate - KC7ZRU <73KC7ZRU73@cyberhighway.net>
Subject: DOS Packet Software
Tate - KC7ZRU wrote:
> http:/www.tapr.org.
Uh - better make that http://www.tapr.org
--
KC7ZRU | In Laramie Area
Laramie, WY | UARC Repeater
DN71eh | 146.610
"The Dungeon" online at http://www.cyberhighway.net/~tateb
KC7ZRU@KC7ZRU.#SEWY.WY.USA.NOAM
Remove 73s from addy to send email
>.
------------------------------
Date: Mon, 3 May 1999 06:47:28 +0100
From: "Per Ødegaard" <per.odegaard@btinternet.com>
Subject: English > Portuguese
Could you please translate the following two paragraphs to Portuguese
for me?
(1) I would appreciate your changing the user status to 'BBS' for
callsign GB7xxx. You do this with the EU command.
(2) Please set up a forwarding file for GB7xxx so that this station
can also receive mail from you. Make sure that you have IF MAN on the
line above C C GB7xxx, and ENDIF below it.
Many thanks in advance!
73, Per (G0DJT/LA9GG).
>.
------------------------------
Date: Mon, 3 May 1999 20:27:22 +0100
From: "McCays" <mccay@easynet.co.uk>
Subject: English > Portuguese
This is the best I can do
(1) eu apreciaria seu mudando o estado de usußrio para ' BBS' para
callsign GB7xxx. Você faz isto com o comando de EU.
(2) por favor monte um arquivo remetendo para GB7xxx de forma que esta
estação
can também recebem correio de você. Tenha certeza que você tem SE o HOMEM
no
enfileire sobre C C GB7xxx, e ENDIF debaixo disto.
Could you please translate the following two paragraphs to Portuguese
>for me?
>
>(1) I would appreciate your changing the user status to 'BBS' for
>callsign GB7xxx. You do this with the EU command.
>
>(2) Please set up a forwarding file for GB7xxx so that this station
>can also receive mail from you. Make sure that you have IF MAN on the
>line above C C GB7xxx, and ENDIF below it.
>
>Many thanks in advance!
>
>73, Per (G0DJT/LA9GG).
>
>
>
>
>
>
>
>
>
>
>
>
>.
------------------------------
Date: Mon, 3 May 1999 20:02:17 +0100
From: "Jeremy Boot" <asperges@innotts.co.uk>
Subject: English > Portuguese
Per Ødegaard <per.odegaard@btinternet.com> wrote in message
news:7gjgsm$me3$1@plutonium.btinternet.com...
> Could you please translate the following two paragraphs to Portuguese
> for me?
>
> (1) I would appreciate your changing the user status to 'BBS' for
> callsign GB7xxx. You do this with the EU command.
>
> (2) Please set up a forwarding file for GB7xxx so that this station
> can also receive mail from you. Make sure that you have IF MAN on the
> line above C C GB7xxx, and ENDIF below it.
>
> Many thanks in advance!
>
> 73, Per (G0DJT/LA9GG).
REPLY:
1) Eu apreciaria sua mudança do status do usußrio a 'BBS' para o
indicativo GB7xxx. que
você faz este com o comando EU.
(2) E favor criar um arquivo 'forwarding' para GB7xxx de modo
que esta
estação possa também receber o correio de você. Certifique-se
de que você tem IF MAN na linha acima de C C GB7xxx, e ENDIF
abaixo dele.
Will this do?
73 de
--
Jeremy Boot, G4NJH
asperges@innotts.co.uk & g4njh@hotmail.com
http://www.innotts.co.uk/~asperges
>.
------------------------------
Date: Mon, 03 May 1999 11:46:30 -0700
From: Rob Dover <rdover@bclc.com>
Subject: Multiplexers?
Hi Per.
Do you KNOW for a fact what devices are in your system, not just what W95
reports? W95 is notorious for misidentifying devices/irqs. It is very
possible you have IRQ's available. Check your hardware and documentation.
You may not need to have IRQ7 assigned to a printer. If you are not
running a 16 bit async card you may want to invest in one. They allow you
to use some of the IRQ's between 9 and 15. Basically, "know" your
hardware!
Another thought, if you are using the built in ports check that you can
set up the shared IRQ's in the BIOS. Just doing it in the Windows Control
Panel is not sufficient.
If none of this works there is another possibility. Use BPQ as your comm
driver and node firmware in your TNCs and set up a diode matrix a-la
TheNet nodestack fashion. Not very elegant I know but it would work.
I run Kantronics TNC's which FBB doesn't support very well therefore the
need for BPQ. I also run about 50% of the time under OS/2 which has no
problem with shared IRQ's provided it is done correctly.
73 -Rob- (rdover'at'bclc.com)
Per Odegaard wrote:
> TO: ROB DOVER
>
> (Since your E-mail address is spam-blocked I will have to respond
> here - out in the open.)
>
> I'm running an FBB mailbox (GB7DJT), and I use the built-in FBB comms
> driver for the TNCs.
> FBB will not accept the same IRQ used for COM1/3 and COM2/4, and
> Win95 tells me that there's a conflict if I try any other IRQs -
> because (I
To be continued in digest: pr_99_98B
Read previous mail | Read next mail
| |
