| |
PA2AGA > PACDIG 15.03.99 02:17l 136 Lines 4035 Bytes #-9926 (0) @ EU
BID : PR_99_57
Read: GUEST
Subj: PacketRadioDigest 99/57
Path: DB0AAB<DB0PV<DB0MAK<DB0HOT<DB0ERF<DB0HSK<PI8DRS<PI8DAZ<PI8GCB<PI8WFL<
PI8VNW
Sent: 990314/2300Z @:PI8VNW.#ZH2.NLD.EU #:40284 [HvHolland] FBB7.00g $:PR_99_57
From: PA2AGA@PI8VNW.#ZH2.NLD.EU
To : PACDIG@EU
Received: from pa2aga by pi1hvh with SMTP
id AA15094 ; Sun, 14 Mar 99 22:43:50 UTC
Received: from pa2aga by pa2aga (NET/Mac 2.3.67/7.5.3) with SMTP
id AA00012880 ; Sun, 14 Mar 99 23:31:59 MET
Date: Sun, 14 Mar 99 23:28:07 MET
Message-Id: <pr_99_57>
From: pa2aga
To: pr_broadcast@pa2aga
Subject: PacketRadioDigest 99/57
X-BBS-Msg-Type: B
Packet-Radio Digest Sun, 14 Mar 99 Volume 99 : Issue 57
Today's Topics:
Analog cell phones for sale
HELP : Wiring for PK-232MBX to TS-440S
No boot m/board ?
PACKET61 PROGRAMME WITH THE MORSE RTTY ETC IN THE CONFIG SYS
Send Replies or notes for publication to: <Packet-Radio@UCSD.Edu>
Send subscription requests to: <Packet-Radio-REQUEST@UCSD.Edu>
Problems you can't solve otherwise to brian@ucsd.edu.
Archives of past issues of the Packet-Radio Digest are available
(by FTP only) from ftp.UCSD.Edu in directory "mailarchives/packet-radio".
We trust that readers are intelligent enough to realize that all text
herein consists of personal comments and does not represent the official
policies or positions of any party. Your mileage may vary. So there.
Loop-Detect: Packet-Radio:99/57
----------------------------------------------------------------------
Date: Thu, 11 Mar 1999 10:44:52 -0500
From: "Tru-Comfort, Inc." <bedwards@tru-comfort.com>
Subject: Analog cell phones for sale
Assorted analog cell phones for sale. They include hand helds,
transportables, etc. Offers will be accepted by e-mail to
bedwards@tru-comfort.com and closed on 3/26/99.
>.
------------------------------
Date: 11 Mar 1999 12:47:13 GMT
From: cmjk2og@aol.com (Cmjk2og)
Subject: HELP : Wiring for PK-232MBX to TS-440S
Do this right and you will love it! No distortion, no hum. Just hit the keys
or push to talk. The following connections should be made:
Pin #3 Data Output (Green)
Pin #4 Ground, Audio Out
Pin #9 Mike Mute, PTT Stnby (Red), Cathode end of 1N914 diode.
Pin #11 Audio in (White)
Pin #12 Ground, Audio In
Pin #13 Anode end of 1N914
I have been using this arrangement for several years now and have had no
problems whatsoever. A helpful tip....go to Radio Shack and buy a 25 pin Din
plug with the insertable female tips. These fit perfectly over the male pins
of the 13 pin Din plug and make the wiring of the plug a snap.
Let me know how you make out and if I can be of any further help give me a
holler.
C. Jespersen K2OG
Bridgeton, NJ
>.
------------------------------
Date: Wed, 10 Mar 1999 16:11:59 -0000
From: "Peter Digby" <Pdigby@tesco.net>
Subject: No boot m/board ?
Hi:
Not sure if this would be the correct group in which to post
this, but I KNOW there are a lot of computer boffs within
the Packet fraternity.
Problem I have here is a "FIC" motherboard M726 that wont
boot - now I have checked time and again all the jumpers,
and all appears ok - what is happening is that on power-up
the floppy comes on / (Light stays on)... Fans and HDD spin
up ok, including CPU...
but no blips from the speaker, or no memory count at post
boot - I have to admit I'm stuck.
The basic system is :
FIC M/ BOARD
64 MB PC100 SDRAM
MATROX MILLENIUM G200 VIDEO (AGP)
INTEL CELERON 333MHZ CPU
I just want to get the basic system running 1st before doing
anything else.
Help:-(
pdigby@tesco.net
Hayling:
>.
------------------------------
Date: Sat, 13 Mar 1999 13:18:03 -0000
From: "Ian Duthie" <Ian.Duthie@tesco.net>
Subject: PACKET61 PROGRAMME WITH THE MORSE RTTY ETC IN THE CONFIG SYS
HELLO I HAVE BEEN USING PAKET61 WITH MORSE RTTY ETC AND I LOST IT WHEN MY
HARD DRIVE FAILED. CAN ANYONE TELL ME WHERE I CAN BEG BORROW OR PURCHASE A
COPY PLEASE. IAN
>.
------------------------------
End of Packet-Radio Digest V99 #57
******************************
You can send in your contribution to this digest by
sending an e-mail to: packet-radio@pa2aga.ampr.org
or (via BBS-net) to: praga@pi8vnw.#zh2.nld.eu
Read previous mail | Read next mail
| |
