| |
KG6BAJ > NWSGRP 06.09.09 16:15l 35 Lines 941 Bytes #999 (0) @ WW
BID : 10846_N1OES
Read: GUEST
Subj: Re: Contructing a balun for receiving antennas
Path: DB0FHN<DB0FOR<DB0SIF<HB9EAS<OK0NHD<DB0ERF<OK0NAG<OK0PPL<DB0RES<ON0AR<
N9ZZK<KG6BAJ<KG6BAJ
Sent: 090906/0800Z @:KG6BAJ.#NCA.CA.USA.NOAM #:10846 [Grass Valley] InterGate $
** NEWSGROUP: rec.radio.amateur.antenna
** FROM : "Gerard" <pe1oud@amsat.org>
"Jeff Liebermann" <jeffl@cruzio.com> schreef in bericht
news:bsf6a51hlfcimfandvkiqip2onge36k1n7@4ax.com...
> On Sat, 5 Sep 2009 20:58:16 -0700 (PDT), skk203
> <skkumble@gmail.com>
> wrote:
>
>>Could anybody let me know how to contruct a bulun to match a
>>longwire
>>antenna to a receiver. A step by step guide would be
>>appreciated as I
>>am a non technical person.
>
> Ummm... you don't use a balun to match a long wire.
Could it be he means an 'MLB', a Magnetic Longwire Balun?
A small MFJ tuner will do a better job, especially since he
claims he'll only needs it on a receiver.
Note: a 'longwire' starts at abt 5 x wavelength. That's not the
same as a random end-fed wire.
73 - Gerard - PE1OUD
E-mail: pe1oud(NOTTHIS)@amsat.org
From The KG6BAJ Newsgroup Server
** InterPacketGATE V1.6 Beta INTERNET <-> PACKET Radio Gateway by NL1RSD **
Read previous mail | Read next mail
| |
