| |
KG6BAJ > NWSGRP 23.09.09 17:01l 35 Lines 1357 Bytes #999 (0) @ WW
BID : 11789_N1OES
Read: GUEST
Subj: Re: Aluminum as a ground system
Path: DB0FHN<DB0FOR<DB0MRW<DK0WUE<DB0RES<WA7V<KG6BAJ<KG6BAJ
Sent: 090922/2001Z @:KG6BAJ.#NCA.CA.USA.NOAM #:11789 [Grass Valley] InterGate $
** NEWSGROUP: rec.radio.amateur.antenna
** FROM : Roy Lewallen <w7el@eznec.com>
christofire wrote:
>
> Isn't aluminium in the presence of air naturally coated with a thin layer of
> aluminium oxide which doesn't conduct? In which case aluminium might be
> fine for lightning conductors but hopeless for RF. What will the tower
> carry? ... if it's all VHF and upwards then there's probably no problem.
>
> Chris
Yes, aluminum is immediately coated by a few-molecule-thick layer of
aluminum oxide when exposed to air. It's a non-porous, brittle, ceramic
material commonly used for hybrid circuit substrates and for sandpaper
grit, among other things. It's why aluminum, despite its extreme
chemical activity, doesn't corrode -- unless the environment is capable
of dissolving the aluminum oxide, which some are. Aluminum oxide is an
excellent dielectric, into at least the microwave range.
But an insulating film doesn't make a conductor "hopeless" -- after all,
the most perfect bare conductor is surrounded -- "coated" if you will --
by air.
Nor does a highly conductive coating degrade a conductor's performance.
Only a layer of poorly conductive material of sufficient thickness is
detrimental.
Roy Lewallen
From The KG6BAJ Newsgroup Server
** InterPacketGATE V1.6 Beta INTERNET <-> PACKET Radio Gateway by E.Konings **
Read previous mail | Read next mail
| |
