| |
PD0RDD > NASA 11.09.98 17:16l 80 Lines 3753 Bytes #-10297 (0) @ WW
BID : 12044_PI8WNO
Read: GUEST
Subj: Nasa Information 141
Path: DB0AAB<DB0KFB<DB0CZ<DB0GE<DB0ZDF<DB0SRS<DB0SIF<DB0HSK<PI8DRS<PI8ZWL<
PI8APD<PI8GCB<PI8WNO
Sent: 980911/1130Z @:PI8WNO.#UTR.NLD.EU #:12044 [DeMeern] FBB5.15c $:12044_PI8W
From: PD0RDD@PI8WNO.#UTR.NLD.EU
To : NASA@WW
Onderwerp: NASA Accepts "Keys: to First U.S.-Built Station Component
Dwayne C. Brown September 4, 1998
Headquarters, Washington, DC
(Phone: 202/358-1726)
James Hartsfield
Johnson Space Center, Houston, TX
(Phone: 281/483-5111)
RELEASE: 98-160
NASA ACCEPTS "KEYS" TO FIRST U.S.-BUILT STATION COMPONENT
The Unity connecting module, the first U.S.-built component
of the International Space Station, moved a step closer to orbit
this week when Boeing, the manufacturer of Unity, officially
handed over the module's "keys" to NASA.
NASA officially accepted the module after review and
certification of Unity's construction by NASA and Boeing station
managers at NASA's Kennedy Space Center, FL. Unity is scheduled
for launch aboard Space Shuttle Endeavour on the STS-88 mission on
Dec. 3. Unity will be launched two weeks after the first station
component, the U.S.-funded, Russian-built Zarya module, from the
Baikonur Cosmodrome in Kazakstan. Unity will be mated to Zarya by
Endeavour's astronauts to begin the five-year orbital assembly of
the International Space Station.
Unity is a critical component of the International Space
Station, a six-sided connector with a berthing port on each side.
Along with Unity at Kennedy, more than a half-dozen major pieces
of U.S. and foreign-built hardware are now being prepared for launch.
"It is not by chance that we named this module Unity,"
International Space Station program manager Randy Brinkley said
following the review. "The name certainly represents all of the
hard work by the Boeing teams and the NASA teams, as well as the
worldwide space station team. The Unity module has been a great
joint effort."
Unity was manufactured by Boeing at NASA's Marshall Space
Flight Center in Huntsville, AL. It was transported from Alabama
to Florida in June 1997, where final assembly and launch
preparations began. Attached to Unity for launch are two conical
mating adapters, also built by Boeing and officially accepted by
NASA this week.
As the Unity acceptance review board completed its official
work, Royce Mitchell, Boeing's ISS deputy program manager, handed
his NASA counterparts plaques bearing a replica of a tool used to
open the hatches on Unity and a symbolic "key" to the module.
The International Space Station draws upon the resources and
expertise of 16 nations and is the largest and most complex
international scientific project ever undertaken. Five
international partners -- the United States; Canada; member states
of the European Space Agency; Japan and Russia; as well as Brazil
and Italy as participants through the United States -- are working
together in a joint endeavor to explore space for the benefit of
all humankind.
-end-
.
Greetings from Hans at Maarssenbroek ³~ The Netherlands
HomebBs : PI8WNO × .
E-Mail : pd0rdd@hj-lammers.demon.nl ×××¶ Úп
Home Page : http://www.hj-lammers.demon.nl Ç××××¶ÚÏÍÏ¿
. ______ Ç××××¶³###³
System : Pentium 75 Ø ÚÄÄÄÊÊÊÊÊÊ¿Ç××××¶³###³ .
Modem : Tnc2nl . Öη ³ððððððððð³Ç××××¶³###³°° ³~
Progr : Sp 9.75 ³~ÖÊÊÊ· ³ððððððððð³Ç××××¶³###³°° ³ .
Tx/Rx : Kenwood TS-811e ³ÖÎÎÎÎη³ððððð²ß²ß²ß²ß²ß²ß²##³°ÛÛÛÛݳ³ ³~
Freq : 430.800 ܱ²Ü²ºãããã㺳ðððððºþÜþÜþÜþÜþÜþº##³°ÝÝÝÝÝ۲ܲ³Ü³Ü
ÛÛ²²±ººººººº³ððððÖÒÒÒÒÒÒ·þÜþÜþº##³°ÛÞÞÞݱ²²ÛÛ²²Û²Û²Ü
----------------------------------------------------
Read previous mail | Read next mail
| |