OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
CX7BY  > NASA     05.10.96 08:58l 70 Lines 3020 Bytes #-11005 (0) @ WW
BID : NASA_96-197
Read: GUEST DK2TUX
Subj: NASA ROLLS OUT AWARD-WINNING "THUNDER"
Path: DB0AAB<DB0KCP<DB0CZ<F6KFG<F6KWP<F6KVE<F1TIV<F8KLY<F6KDC<F1HAQ<F5SLQ<
      ZS2FP<KA0WIN<KA0WIN<KE0WO<VE4KV<WB0TAX<PU3DTA<PY3PS<PY3KC<PY3SS<PY3KW<
      CX2ACB<CX7BY
Sent: 961002/0332Z @:CX7BY.MVD.URY.SA #:10904 [Montevideo] FBB7.00a $:NASA_96-1
From: CX7BY@CX7BY.MVD.URY.SA
To  : NASA@NASA


        A NASA technology that could make everything from
audio speakers to heart pumps smaller and more efficient has
been recognized as one of the 100 most significant
technological advancements of the past year.

        Dubbed THUNDER, for Thin-Layer Composite-Unimorph
Piezoelectric Driver and Sensor, its potential applications
could be applied in electronics, optics, jitter (irregular
motion)  suppression, noise cancellation, pumps, valves and a
variety of other fields.

       Researchers at NASA's Langley Research Center,
Hampton, VA, have taken advantage of a well-known phenomenon
exhibited by piezoelectric materials.  These materials
generate mechanical movement when subjected to an electric
current, as in a speaker or actuator, and generate electrical
charge in response to mechanical stress, as in certain types
of sensors.

        The Langley researchers, a multi-disciplinary
materials integration team, have succeeded in developing and
demonstrating a piezoelectric material that is superior to
commercially available piezoelectric materials in several
significant ways.  It is tougher, more durable, allows lower
voltage operation, has greater mechanical load capacity, can
be easily produced at a relatively low cost and lends itself
well to mass production.

        The first generation of THUNDER devices are being
fabricated in the lab by building up layers of commercially
available ceramic wafers.  The layers are bonded using a
Langley-developed polymer adhesive.  The process results in a
prestressed device with significantly improved performance.
In addition, the process is controllable and results in
highly uniform pieces of hardware.

In the ideal fabrication process -- which researchers believe
is technically feasible -- piezoelectric ceramic materials
would be ground to a powder, processed and blended with an
adhesive before being pressed, molded or extruded into wafer
form.  The result would be increased ability to tailor
properties, more flexibility in choosing methods of
manufacturing and increased amenability toward mass
production.

        THUNDER wafers could be any practical size from areas
of a few square millimeters to several square meters and
thicknesses of fractional millimeters to several millimeters.

        Memoranda of agreements have been signed with six
companies to develop THUNDER technologies and related
commercial products. Approximately 15-20 more companies are
negotiating agreements.

       THUNDER technology will be honored by Research and
Development magazine at the annual "R&D 100 Awards" banquet
October 14 in Philadelphia, PA. The R&D 100 Award, formerly
IR-100, is presented annually by the magazine to the
innovators of the 100 most technologically significant new
products of the year.  Selections are made by a panel of
scientists and engineers after studying new technologies from
around the globe. Langley has competed in the program for 27
years and has earned 31 awards.



Read previous mail | Read next mail


 22.11.2026 18:20:17lGo back Go up