OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
YU7APV > NASA     22.07.96 21:57l 45 Lines 1600 Bytes #-11079 (0) @ AMSAT
BID : 1952_YU7APV
Read: DF0VR GUEST DK2TUX
Subj: NASA Delays Launch of Space Shuttle
Path: DB0AAB<DB0KCP<DB0CZ<DB0FRB<DB0PSC<DB0GH<LX0PAC<ON7RC<ON1BWP<ON6AR<
      F6CNB<WB0TAX<PU3DTA<RA3KP<UA3CR<TA2EM<TA3BOX<TA3MBX<TA3BL<YU7APV
Sent: 960716/2224Z @:YU7APV.SRB.YUG.EU #:1952 [Novi Sad-HF] #:1952 Z:21000 FBB5
From: YU7APV@YU7APV.SRB.YUG.EU
To  : NASA@AMSAT

NASA Delays Launch of Space Shuttle

Michael Braukus                                  July 12, 1996
Headquarters, Washington, DC
(Phone:  202/358-1979)

RELEASE:  96-138

NASA DELAYS LAUNCH OF SPACE SHUTTLE

        NASA managers today decided to replace the reusable
solid rocket motors on the Space Shuttle Atlantis, delaying
its July 31, 1996, launch to rendezvous with the Russian
space station Mir until mid-September.

        Atlantis' motors are being replaced because
technicians disassembling the motors of the previous Space
Shuttle mission, STS-78, observed that hot gas had seeped
into J-joints in the field joints of the motors.  In some areas,
the hot gas had penetrated through the J-joint to, but not
past, the capture feature O-ring.

        An investigation of this field joint found that the
most probable cause of this seepage was related to the use of
a new adhesive and cleaning fluid.  The change to the new
adhesive and cleaning fluid was required to comply with new
Environmental Protection Agency regulations which reduce
ozone depleting substances.

        The investigation also concluded that the risk of a
field joint failure was improbable and that the STS-79
boosters, assembled with the new field joint cleaning process
and adhesive, were safe to fly.

        The decision to replace the STS-79 solid rocket motors,
which also utilized the new adhesive, was made to provide an
opportunity to better understand the J-joint failure and to
improve the safety margin of the joint.

                          - end -


Read previous mail | Read next mail


 22.11.2026 20:02:36lGo back Go up