| |
KD6MSM > NASA 21.06.96 01:57l 89 Lines 4183 Bytes #-11111 (0) @ WW
BID : 11852_W6VIO
Read: DG2GAQ GUEST DK2TUX
Subj: Galileo instruments: PWS
Path: DB0AAB<DB0PV<DB0WGS<OE5XZL<OE3XBS<OE6XHG<HG1KZC<HA1VH<HA5KDF<HG8GL<
HA5OB<HA3PG<VE4KV<KA6EYH<W6VIO
Sent: 960620/1449z @:W6VIO.#SOCA.CA.USA.NOAM Pasadena #:11852 Z:91109
PWS
Plasma Wave Subsystem
Donald A. Gurnett, Principal Investigator
University of Iowa
Mission Objectives
* Investigate the role played by plasma waves and radio emissions in
controlling the scattering and/or loss of trapped radiation in the
Jovian magnetosphere.
* Derive fundamental plasma parameters, such as electron density, from
observations of plasma wave phenomena.
PWS Description
* The PWS consists of one 6.6 m tip-to-tip electric dipole antenna
(mounted on the end of the 10.6 m magnetometer boom) and two search
coil magnetic antennas (mounted on the high-gain antenna feed).
* The dipole antenna has two elements, with a preamplifier assembly
between them, mounted in opposing directions perpendicular to the
magnetometer boom and the spacecraft spin axis. The dipole antenna
measures electrostatic waves in the frequency range of 5.62 Hz to
5.6 MHz.
* One search coil magnetic antenna is optimized for low frequencies (5
to 3.5 KHz) and is oriented parallel to the electric dipole antenna.
The other search coil magnetic antenna is optimized for high
frequencies (1 to 50 KHz) and is oriented perpendicular to the
electric dipole antenna. Two search coil preamplifiers are mount on
the high gain antenna near the search coils.
* The electronics for processing the signals from the antennas
preamplifiers is contained in a single package.
Design Details
* The main electronics package is mounted in the spacecraft body near
the base of the magnetometer boom and contains a low rate system for
survey spectrums, and a high rate system for wideband spectrums.
* The low rate system contains three spectrum analyzers:
1. A high-frequency analyzer with 42 frequencies between 100.8 KHz
and 5.645 MHz with delta-f/f of 10.0%, dynamic range of 100 db,
spectrum sweep time of 18.67 sec, and a bandwidth of 1.34 kHz.
2. A medium-frequency analyzer with 112 frequencies between 40 Hz
and 160 KHz with delta-f/f of 8.0%, dynamic range of 100 db, and
spectrum sweep time of 18.67 sec. This frequency range is
divided into four bands, of 28 frequencies, with bandwidths of
4.26, 6.67, 120, and 1510 Hz.
3. A low-frequency analyzer with four logarithmically-spaced
channels between 5.62 and 31.1 Hz, a delta-f/f of 67 %, dynamic
range of 110 db, and bandwidths of 0.83, 1.86, 2.75, and 4.79
Hz. All four channels are sampled in 2.67 sec.
* The high rate receiver provides waveform measurements in three
frequency bands, 5 Hz to 1 kHz, 50 Hz to 10 kHz, and 50 Hz to 80
kHz.
Instrument Parameters
Instrument Mass 7.14 kg Thermal Range:
Power Consumption: Operating (GLL 3-210)
Instrument 6.8 W Mag. Search coils -105 to 80 deg. C
Suppl. Heater 3.0 W Mag. field Pre-Amp -20 to 82 deg. C
Elect. field Pre-Amp -25 to 55 deg. C
Elect. Dipole Ant. -190 to 151 deg C
Elect. Dipole Latch -15 to 40 deg. C
Elect. Dipole Hinge -171 to 40 deg. C
Microprocessor: 1802 type Non-Operating (GLL 3-210)
ROM/RAM: 0 / 512 B Mag. Search coils -105 to 80 deg. C
Mag. field Pre-Amp -20 to 90 deg. C
Elect. field Pre-Amp -40 to 55 deg. C
Size: 41.8 x 17.8 x 12.2 cm Elect. Dipole Ant. -190 to 151 deg C
Elect. Dipole Latch NA
Elect. Dipole Hinge NA
Inst. Modes:
Off Wideband waveform modes: Waveform resolution modes:
POR Mode 1 (50 Hz-10 kHz) Mode 1 (4-bits, 25200 samples/sec)
On
Mode 2 (50 Hz-80 kHz) Mode 2 (4-bits, 201600 samples/sec)
Mode 3 (5 Hz-1 kHz) Mode 3 (4-bits, 3150 samples/sec)
-end-
Read previous mail | Read next mail
| |