OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
W6VIO  > NASA     03.02.96 22:04l 104 Lines 4748 Bytes #-11250 (0) @ WW
BID : 13063_W6VIO
Read: GUEST DK2TUX
Subj: Cassini update - 2/1/96
Path: DB0AAB<DB0PV<DB0WGS<OE3XBS<S50BOX<S55FBB<WX3K<KA6EYH<W6VIO
Sent: 960202/2137z @:W6VIO.#SOCA.CA.USA.NOAM Pasadena #:13063 Z:91109

[ This article is relayed from Internet courtesy of the JPL Amateur Radio Club ]

PUBLIC INFORMATION OFFICE
JET PROPULSION LABORATORY
CALIFORNIA INSTITUTE OF TECHNOLOGY
NATIONAL AERONAUTICS AND SPACE ADMINISTRATION
PASADENA, CALIF. 91109. TELEPHONE (818) 354-5011

CASSINI PROGRAM STATUS
February 1, 1996

     Key flight hardware was successfully integrated over the
past month into the Cassini spacecraft framework in JPL's
Spacecraft Assembly Facility clean room, while dozens of other
Cassini hardware and software deliveries and tests were completed
at facilities in the U.S. and Europe in preparation for the
international mission to Saturn.

     In January, engineers installed the flight model of the
power and pyro subsystem, which governs the flow of electricity
through the spacecraft's seven miles of cabling; the attitude and
articulation control subsystem, which allows the spacecraft to
maintain its bearings in space; and the command and data
subsystem, which acts essentially as Cassini's brain, controlling
all spacecraft functions.

     Last week also marked the completion of qualification
testing of Cassini's propulsion module subsystem after a
successful 200-minute test firing of the spacecraft's main
engine.  The test demonstrated the capability of the main engine
assembly including the successful operation of JPL-developed
engine gimbal actuators -- sophisticated devices that fine-tune
the motion and pointing of the spacecraft's two engines.    The
engine firing test was the longest of its kind ever conducted and
required reconfiguration of rocket test hardware at the White
Sands Test Range in New Mexico.

     The engine gimbal actuators, based on the design of unique
actuators used on the orbiter spacecraft for the Viking missions
to Mars in the mid-1970s, come into play  during spacecraft
course corrections and in the critical braking maneuver that
Cassini must perform when it arrives at Saturn in July 2004.
There, Cassini must fire one of its engines for about 90 minutes
to brake into orbit around the ringed planet.  The two redundant
engines are mounted side-by-side at the base of the Saturn
orbiter, and the engine that fires must be pointed so that the
rocket thrust is directed through the spacecraft's center of
gravity. The engine gimbal actuators, responding to commands from
the attitude and articulation control subsystem,  will make
constant minute adjustments in the engine's position to
compensate for the shifting weight of  the spacecraft's
propellant.

     While the Cassini spacecraft is being assembled in the clean
room, ground systems and spacecraft systems engineers in an
adjacent shirtsleeve environment are remotely controlling the new
subsystems in tests that run each through the commands and
simulations of phenomena they will experience in flight.   This
complex, computer-based ground system  largely resembles the one
that will be used to control Cassini once in flight, and it
allows the Cassini team to identify problems and make changes
needed in the flight operations system well ahead of launch.

     Engineers last month also successfully completed launch-like
vibration testing for the developmental test model of Cassini's
Huygens probe.  This conical payload of science instruments,
provided by the European Space Agency (ESA),  will be deployed
from the orbiter and parachute to the surface of Saturn's moon
Titan, in a manner similar to the  recent successful mission of
the Galileo atmospheric probe into Jupiter.

     Important tests of Cassini's multiple-frequency radio system
were also successfully completed this month at JPL.  In addition,
ESA, which is assembling the Huygens probe in Otterbrun, Germany,
received hardware for U.S.-provided Titan science instruments --
a qualification model of the gas chromatograph/mass spectrometer
from NASA's Goddard Space Flight Center, Greenbelt, MD, and the
flight model of the descent imager/spectral radiometer from the
University of Arizona.

     Integration of Cassini components will continue through
October,  readying the spacecraft for dynamic and other testing
in the space-like environment of the solar-thermal vacuum chamber
at JPL.  The spacecraft will be shipped to Cape Canaveral, FL, in
late April 1997 for an October 1997 launch.

                         #####

The address for the Cassini Program's home page is
http://www.jpl.nasa.gov/cassini/

--
Gregory R. LaBorde - KD6MSM         | Internet: laborde@kilroy.jpl.nasa.gov
Jet Propulsion Laboratory           | AMPRNet : kd6msm@jpl-gw.w6vio.ampr.org
Systems Engineering - Galileo OET   | Packet  : KD6MSM@W6VIO.#SOCA.CA.USA.NA
M/S 264-805 4800 Oak Grove Drive    | Phone   : (818) 393-1107
Pasadena, CA  91109                 |







Read previous mail | Read next mail


 23.11.2026 00:29:10lGo back Go up