OpenBCM V1.07b12 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
VE2HAR > MT63     12.03.05 05:38l 149 Lines 3933 Bytes #-7326 (0) @ WW
BID : 9249SENTTO
Read: GUEST
Subj: Re: [MT63] Sound Card Calibration
Path: DB0FHN<DB0THA<DB0ERF<DK0MNL<DB0FSG<DB0AAB<F6KFT<DB0GE<DB0GV<DB0LJ<
      DB0RES<ON0AR<VA2HAR<VE2HAR
Sent: 050312/0246z @:VE2HAR.#MTL.QC.CAN.NOAM Laval #:41541 $:9249sentto

Actually Karl, you are wrong to blame "Windows Junk" as you call it.
gMFSK also allows for calibration of the sound card. This is done by
accessing [settings-preferences-devices-sound] and adjusting as needed
there.

Steve/WM5Z

karl larsen wrote:

>
>
> Steven M. Milner wrote:
>
> >Forgive the crossposting to four groups, but I thought that some of
> you may
> >benefit from my experience in setting up PCs for sound card modes.
> >
> >I am trying to set up two computers to work with a number of modes
> including
> >MT63, Olivia, and SCAMP.  One computer worked OK on MT63 and
> marginally on
> >Olivia, the other could not receive MT63 or Olivia modes at all!
> >
> >I found that this was due to differences in sound card clock speeds.  The
> >nominal clock speed is 11025 Hz but each card varies from that.  MixW
> has a
> >procedure for correcting for this variation by tuning in WWV and
> examining
> >the tones with SSTV mode.  After performing this adjustment, MT63 worked
> >perfectly.
> >
> >OliviaAid has a user defined sound card setting for compensating for this
> >variation.  To find the right setting you need to use a test signal and
> >adjust the setting for maximum S/N ratio.  The formula is: (Actual clk
> >spd/11025)*8000 = sound card setting.  This is what I ended up with:
> >
> >        Sound Card                MixW (ppm)  Olivia  Actual Clk (Hz)
> >Sound Blaster 24bit External      -2106        7977      10993
> >Sound Blaster MP3+ External        6983        8098      11160
> >SoundMax Digital Audio Internal    6843        8100      11163
> >
> >
> >
>     I am using a Sound Blaster on gMFSK which has every mode known to
> man and I have never adjusted anything. I think your windows junk is too
> screwed up.
>
> karl
>
> >Question for the Oliviadata group...Would data decoding improve if we
> could
> >correct the Paclink software timing for these variations in sound
> card clock
> >speeds?  Rick, would it be possible to have a sound card setup in the
> >software with a correction entry?
> >
> >Aloha & 73,
> >Steve - WH6N
> >
> >
> >
> >
> >
> ><<  Try MT63 on 80m - great fun!>>
> >
> >- The MT63 Reflector -
> >   MT63@egroups.com
> >
> >(To unsubscribe. send email to
> >MT63-unsubscribe@onelist.com)
> >
> >Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>
> <<  Try MT63 on 80m - great fun!>>
>
> - The MT63 Reflector -
>    MT63@egroups.com
>
> (To unsubscribe. send email to
> MT63-unsubscribe@onelist.com)
>
>
>
> *Yahoo! Groups Sponsor*
> ADVERTISEMENT
> click here
> <http://us.ard.yahoo.com/SIG=129ih4csd/M=298184.6018725.7038619.3001176/D=groups/S=1705034690:HM/EXP=1110675023/A=2593423/R=0/SIG=11el9gslf/*http://www.netflix.com/Default?mqso=60190075>
>
>
>
> ------------------------------------------------------------------------
> *Yahoo! Groups Links*
>
>     * To visit your group on the web, go to:
>       http://groups.yahoo.com/group/MT63/
>
>     * To unsubscribe from this group, send an email to:
>       MT63-unsubscribe@yahoogroups.com
>       <mailto:MT63-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>
>     * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
>       Service <http://docs.yahoo.com/info/terms/>.
>
>


------------------------ Yahoo! Groups Sponsor --------------------~-->
Over 1 billion served! The most music videos on the web.
Click to Watch now!
http://us.click.yahoo.com/xmKGzA/IARHAA/kkyPAA/CPMolB/TM
--------------------------------------------------------------------~->

<<  Try MT63 on 80m - great fun!>>

- The MT63 Reflector -
   MT63@egroups.com

(To unsubscribe. send email to
MT63-unsubscribe@onelist.com)

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/MT63/

<*> To unsubscribe from this group, send an email to:
    MT63-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/








Read previous mail | Read next mail


 04.04.2025 15:52:19lGo back Go up