| |
DM3ML > RTTY 05.03.04 09:07l 70 Lines 3428 Bytes #999 (60) @ DL
BID : HU3CELDB0TUD
Read: GUEST DK3UD
Subj: MixW Version 2.12
Path: DB0FHN<DB0FOR<DB0SIF<DB0MW<DB0ROF<DB0GOS<DB0FBB<DB0ERF<DB0GR<DB0BLO<
DK0BLN<DB0TUD
Sent: 040305/0656z @:DB0TUD.#SAX.DEU.EU [TCP/IP-NODE DRESDEN] DP6.00 $:HU3CELDB
From: DM3ML @ DB0TUD.#SAX.DEU.EU (Eike)
To: RTTY @ DL
Liebe Funkfreunde,
auf der Downloadseite von MixW http://www.mixw.net/downloads.html ist die
Version 2.12 neu erschienen.
Die Neuigkeiten stehen auf dieser Liste :
MixW 2.12
- PSK31, QPSK31, FSK31:
MMVari codetable is supported (G3PLX table
is extended to Japanese alphabet by Makoto Mori, JE3HHT)
- Spectrum View:
Dynamic range switch is added (80, 60, 40
or 20 db for the visible range of spectrum/waterfall)
- Spectrum View:
FFT window selection is added in the Soundcard settings
(Square, triangle, cosine, Hamming, Nuttall). Square window has the best
frequency resolution, Nuttall has the best sidelobe suppression and
is the best for the IMD measurements. Cosine window is the default and
seems to be a reasonable compromise for usual daily operations.
- RX window:
Tooltip shows the distance and the azimuth to the pointed WW GRID locator
- PSK31:
bandpass filter is improved, seems to work better for close signals.
- RigExpert support:
Input/Output level dialog is added
- CAT:
IC-703 is added to the supported TRCVR table
KENWOOD TS50 lockup at start bug fixed
- New Macros:
<MYWWLOC>, <WWLOC> - local and remote WW GRID locator
- Macro <NAME> returns "my friend" instead of "OM" when the name field is
empty.
You may change the value by editing the macro <OM>. Just erase
"my friend" in the text box of Edit Macro dialog if you want
nothing to be transmitted in that case.
- TEOAN:
Remote operation via LAN is supported for RigExpert device.
Soundcard settings dialog is rearranged in order to support
remote operations settings.
For MixW RigExpert users: MixW 2.12 offers an unique feature of
connecting a PC with TEOAN program and MixW RigExpert connected to a
transceiver into a local area network. Then, running MixW 2.12 on
another computer on a network (or via high-speed internet connection)
makes possible operating digital modes using that transceiver. In the
TEOAN program, set the virtual COM port number for MixW RigExpert and
a TCP port number (the default value is OK in most cases). In MixW2,
choose "The Eye of a Needle" as an audio device. Enter an IP address
or a name of the computer with TEOAN running, and the same TCP port
value.
Note: the sound stream is not compressed, so no loss of quality is
expected but on the other hand the data rate is high, up to 0.4 MBit/sec
(RX or TX) or 0.8 MBit/sec for TX in fullduplex mode. Usual 10MBit LAN is
good enough for this application, but slow modem connections will not
be able to handle such big stream of data.
- CW:
"@" (AC) symbol is added to the CW table
- Esc behaviour has been changed.
It stops the macro and cleans the TX buffer but does not turn off
the TX. Press Esc twice to abort the transmiision. If you do not like
new behavior then find "OldEsc=0" in the MixW2.ini file and replace "0"
with "1".
- Fast INI file reading.
Slow built-in system INI file reading and writing procedures are replaced
with optimized ones.
- HTML help support is added. If you prefer old MixW2.HLP file then just
remove
the file MHH.dll from MixW2 folder (or rename it).
- Band edges are marked with "stop" icon on the frequency scale.
Viel Spass, Gut Funk und 73 de Eike, DM3ML
Read previous mail | Read next mail
| |
