OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
VK5ZCF > MIR      12.06.99 07:12l 30 Lines 981 Bytes #-9801 (0) @ WW
BID : A50276VK5ZCF
Read: DH8HHA GUEST OE7FMI
Subj: Re: [sarex] Mir SSTV back on 2000 utc
Path: DB0AAB<DB0ZKA<DB0ABH<DB0BOX<DB0MAK<OK0PKL<OK0PPR<OK0PPL<OK0POK<9A0YRB<
      PP5BLU<WB7AWL<KA6EYH<N1UAN<VE1SMU<VK7AX<VK2KAW<VK2CZR<VK2IO<VK2KLW<
      VK2DYX<VK2PYU<VK2TV<VK5HB<VK5WI<VK5BRC
Sent: 990611/0300Z @:VK5BRC.#BVL.#SA.AUS.OC #:45011 [Tanunda] $:A50276VK5ZCF
From: VK5ZCF@VK5BRC.#BVL.#SA.AUS.OC
To  : MIR@WW


Cannot comment on the physical tracking aspects etc (there are 
already several good texts on this subject "Out There".

 But for P.C Sound Card SSTV reception/transmission, you might like to
look at Win-95-SSTV or "Chroma-pix", by "Silicon Pixels" - you should be
able to locate either of these on the 'Net.

 I have used both of the above under Win95 and Win98, they are both easy to
set up, and a snack to get running, in short if you want to use the
minimal hardware solution then the Sound card is the way to go.

 For reception, a simple cable from receive audio, into the line (or Mic)
inputs on your sound card, adjust levels - usually a once-off to "get the
feel" of the correct settings and that is it.

 Tx, Audio feed from Line out or Speaker audio out, a single control line from
a spare Com port to act as the PTT control trigger, and you are on air in the
TX mode as well.

 HTH,  
       Glenville T. Sawyer.





Read previous mail | Read next mail


 12.04.2026 14:03:56lGo back Go up