VK3FSK > TNC2 03.11.94 23:32l 37 Lines 1610 Bytes #999 (0) @ WW
BID : 1364_VK3FSK
Read: GUEST
Subj: TPK1-82 MFJ CONFERENCE
Path: DB0KCP<DB0AAB<DB0FSG<DB0LNA<DB0RGB<DB0ABH<DB0BOX<DB0MRW<OK0PKL<DB0JES<
DB0BAL<DB0NHM<DB0SIF<DB0GV<DB0EAM<DK0MWX<DB0MKA<DB0NDK<DB0OVN<PI8AIR<
SM2IRZ<SK2AT<OH6RBG<OH6RBV<F6CNB<VK3BBS<VK3KSD
Sent: 941101/0939Z @:VK3KSD.#MEL.VIC.AUS.OC #:41739 [Somerville] $:1364_VK3FSK
From: VK3FSK@VK3KSD.#MEL.VIC.AUS.OC
To : TPK182@WW
VK3FSK/TPK 1.82 Msg #:1364 Date:01-11-94 Time:18:33Z
Δ-π TpkSign v3.0e πΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔ
HI.
If you are having probs trying to forward to your bbs and ending up in
conference mode and using a MFJ1278 with the old config for tpk1-81 then
reset the tnc dumping all the parameters..
The ones that must be included in your config.tpk are
8BITCONV ON...........CHECK 30.............CONSTAMP ON/OFF
ECHO OFF..............FLOW OFF.............HEADERLN ON/OFF
MSTAMP ON/OFF.........MAXFRAM ?............MCOM ON/OFF
NEWMODE ON............RESPTIME ?...........XFLOW OFF
ACKPRIOR OFF..........CMSG ON..............CBELL ON
CONOK ON..............BTEXT................CTEXT
THESE ARE ALL THAT ARE NEEDED TO PLACE IN YOUR CONFIG.TPK FOR THE TNC.AS
WELL AS THE NORMAL BR STATEMENTS AND THE SETUP YOU ALREADY HAVE FOR 1-81
THERE ARE A FEW PARAMETERS DIFFERENT TO WHAT OU HAVE BEEN USING IN TPK
1-81....THIS SHOULD FIX THE PROBLEM OF MFJ1278 GOING INTO CONFERENCE MODE
ON YOUR BBS.....
GOOD LUCK 73..KEN
°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°
°ΫΫΫΫΫΫΫέ°°°ΫΫΫΫΫΫέ°°ΙΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝ»°
°°°°°°°Ϋέ°°°°°°°°Ϋέ°°Ί De VK3FSK.Ken. VK3FSK @ VK3KSD Ί°
°°°°°°Ϋέ°°°°°°ΫΫΫέ°°°Ί QTH: Langwarrin.Vic. LOC. QF21OR Ί°
°°°°°Ϋέ°°°°°°°°°°Ϋέ°°Ί VK3FSK @ VK3KSD.#MEL.VIC.AUS.OC Ί°
°°°°Ϋέ°°°°°°ΫΫΫΫΫέ°°°ΘΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΌ°
°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°
Read previous mail | Read next mail
| 
