OpenBCM V1.07b12 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
DL2MFB > MFJ      01.07.97 21:14l 25 Lines 1141 Bytes #-10121 (0) @ WW
BID : 177DB0FSG02Y
Read: DG7MDK GUEST DF6VB
Subj: problems with 9k6
Path: DB0AAB<DB0FSG
Sent: 970701/1752z @:DB0FSG.#BAY.DEU.EU [BayCom-Mailbox in Freising] BCM1.38v1
From: DL2MFB @ DB0FSG.#BAY.DEU.EU  (<christian>)
To:   MFJ @ WW
X-Info: No login password
X-BID: 177DB0FSG02Y

Hallo dear Hams,
this is Chrsitian from nr Freising/Munich Airport, Southern Bavaria, Germany.
Thank you for reading the following message:
       A few days ago I added a 9k6 addon modem into my multimode controller
MFJ-1278B DSP, installed and wired that modem. That I tested the modem to-
gether in connection with the notebook. I switched into the mode vp,9600
and the TURBO LED turned on in red. I made an interface cable to the TRX
and tested the complete equipment again.(notebook + modem + trx)
      That it happened:
When I have connected the modem to the 9k6 trx there is an increase of
noise in the loadspeaker but the modem recieves nothing. The transmission
of the modem is ok. When I connect a BAYCOM-modem everything is ok.
      If anyone has an ideal where this effect is originating from or
what I can do to solve that problem it would be very nice to tell it to
me.
mni tks in advance es vy 73 de Christian
packet: DL2MFB @ DB0FSG.BAY.DEU.EU
pactor: DL2MFB @ DK0MUN.BAY.DEU.EU
e-mail: WNISCC.MCHN@T-ONLINE.DE


Read previous mail | Read next mail


 18.03.2025 17:34:24lGo back Go up