| |
IW1CCB > MFJ 16.02.97 23:09l 34 Lines 1614 Bytes #999 (0) @ WW
BID : 41645_I1YLM
Read: GUEST
Subj: MFJ-1278 - 9600 Bd HELP !!!
Path: DB0KCP<HB9OS<HB9H<HB9OK<IW2FPO<IK2QCA<IK1ZZN<IK2HDG<I4UKI<I4FP<IW4CRL<
I4EUM<IW2KTL<I1DEP<I1VDM<I1YLM
Sent: 970216/1753Z @:I1YLM.IPIE.ITA.EU #:41645 [Torino] FBB5.15c $:41645_I1YLM
From: IW1CCB@I1YLM.IPIE.ITA.EU
To : MFJ@WW
Thank you for reading this message.
I have recently bought a MFJ-9600B board (FSK 9600 G3RUH) but there are
some problems. When i use normal 1200 Baud mode the yellow led "DCD"
is always ON or OFF in function of the jumper "JP8" configuration on the
modem-board. "DCD" must be ON only when a digital signal is received and
not always - in this case the modem transmit only if i set FULLDUP ON.
In 9600 baud mode "DCD" signal works perfectly.
If you have a MFJ-1278 TNC and you use it at 9600 baud succesfully
i' d be grateful if you can help me.
+--------------------------------------------------------------------------+
|73 Claudio OLIVERO PISTOLETTO (IW1CCB) ____ Commodore AMIGA 4000/040/25 |
| / / / 10Mb RAM, 1.6 Gb Hard-Disk |
| Via Garelli, N.6 - JN35NC ____ / / / Monitor SVGA Commodore 1960 |
| 10059 Susa (TORINO) - ITALY \ \ \ / / / -------------------------------+
| Ip-Address 44.134.128.57 \ \ X / / Pentium 133, 40Mb RAM, Win95 |
| Telephone +39-122-622085 \_X_X_/ 1.6 Gb Hard-Disk, CdRom6X, SB16 |
| SVGA S3Trio 2MB, Monitor SVGA |
| Ax25-Mail & Internet-Mail : +--------------------------------------+
| | Tnc MFJ-1278 Turbo (2400 PSK) |
| iw1ccb @ i1ylm.ipie.ita.eu (ax25) | Rtx IC-02E, IC-211E, C-5608D |
| iw1ccb @ radio-gw.cisi.unito.it | DJ5KQ AutoTracking Sat. System AZ-EL |
+-----------------------------------+--------------------------------------+
Read previous mail | Read next mail
| |
