| |
IK2UWS > LINUX 14.07.03 00:13l 134 Lines 2811 Bytes #999 (0) @ WW
BID : 1085_IK2UWS
Read: GUEST DB0FHN DL7NDR
Subj: HELP LINPAC AUTOM-PASSWORD
Path: DB0FHN<DB0RGB<DB0FSG<DB0PV<DB0MRW<OK0PPL<RZ6HXA<IK1ZNW<IK2QCA<IK2ANE
Sent: 030713/0934Z @:IK2ANE.ILOM.ITA.EU #:10002 [Milano] FBB7.00i $:1085_IK2UWS
From: IK2UWS@IK2ANE.ILOM.ITA.EU
To : LINUX@WW
# Generated by: TstHWin v2.21b - Registered to IK2UWS
# On : 13/07/2003 10.33.56
# UTC: 13/07/2003 8.33.56
DEAR OMs,
I AM USING LINUX MANDRAKE 9.1 WITH KERNEL 2.4.21-0-18 AND HAVE INSTALLED A
LINPAC0.16 IN ORDER TO HAVE A PAKET ACCESS TO MY HOME BBS
IK2ANE-8 THAT IS A BBS WITH REQUIRES A PASSWORD.
I THINK TO HAVE DONE ALL THAT I COULD IN ORDER TO SETUP THE AUTOMATIC
PASSWORD IN LINPAC0.16, I.E.: SETUP THE FILE STATION.DATA.
HOWEVER WHEN I INSERT THE COMMAND ":FORWARD" AND THE BBS REPLIES WITH THE
FRAME PASSWORD, THE PROGRAMM LINPAC DOESN'T RESPOND WITH THE EXPECTED FRAME.
HEREWITH THE DIALOG BETWEEN LINPAC AND BBS:
IK2ANE-8> [NNNNNNNNNN]
KISS0: AX25: IK2UWS->IK2ANE-8 <RR R R1>
KISS0: AX25: IK2ANE-8->IK2UWS <RR C+ R0>
KISS0: AX25: IK2UWS->IK2ANE-8 <RR R- R1>
THE FILES HEREBELOW REPORT MY CONFIGURATIONS.
station.data:
[IK2ANE]
NAME=BBS with password
TYPE=FBB
LOGINPW=myownpassword
PWPROMPT=IK2ANE-8>
[IK2UWS]
NAME=GIORGIO
TYPE=FBB
init.mac (FILE)
:macro INIT
;; Linpac init script
;; This script is called when LinPac is started
;; Default port
port kiss0
;; Log errors
errorlog error.log
;; Color scheme - uncomment one to select
;;color_default
;;color_blue
;;color_tnt
;; Screen setup
;; Normal mode - editor under QSO window
statline 15
chnline 20
;; Uncomment this for editor above QSO window (Baycom-like)
;; (and comment out lines for normal mode)
;;swapedit
;;statline 4
;;chnline 20
redraw
;; Callsign setup
mycall@1 IK2UWS
mycall@2 IK2UWS
mycall@3 IK2UWS
mycall@4 IK2UWS
mycall@5 IK2UWS
mycall@6 IK2UWS
mycall@7 IK2UWS
mycall@8 IK2UWS
;; Unproto calls
unsrc LINPAC
undest INFO
;; Other settings
cbell on
knax on
remote on
infolevel 1
;; Default QRG
set QRG@0 "144.8125 MHz"
;; Default encoding translation (for all channels)
set DEF_ENC@0 iso1
translate %DEF_ENC@0
;; Default set of enabled remote commands
set DEF_RCMD@0 "AB D E VER L RP B MH N RT YPUT W R WB RB A
CONV I H Q U CS"
;; Paths
set SAVE_PATH "./save"
set MAIL_PATH "./mail"
set USER_PATH "./user"
set LOG_PATH "./log"
;; Path to home BBS - the port name is REQUIRED - i.e.
radio:OK0PAB OK0NMA
set HOME_BBS "kiss0:IK2ANE-8 "
set HOME_ADDR "IK2ANE.#ILOM.ITA.EU"
;; Preferred size of 7plus blocks
set BLOCK7P 5120
;; ======================================================
;; System settings - do not modify this if you don't know
;; what you are doing
;; ======================================================
;; Automatic start of external protocols
watch 0 "\r#BIN#" ":autobin"
watch 0 "\x5\x1" ":yapp"
watch 0 "\r go_" ":bsave"
I WOULD BE GRATEFUL FOR YOUR PROMPT REPLY AS I'M EXPECTING TO USE AS SOON AS
POSSIBLE YOUR GOOD PROGRAM!
BEST REGARDS.
GIORGIO ik2uws
Read previous mail | Read next mail
| |
