| |
PA1HR > LINUX 06.04.00 10:08l 33 Lines 996 Bytes #999 (0) @ EU
BID : 51523_PI8HZW
Read: GUEST DL7NDR
Subj: LINUX/LinkTrxIIIA/OptoScc
Path: DB0ABH<DB0RGB<DB0MRW<DB0ERF<DB0SAW<DB0MAR<DB0IL<DB0RDB<DB0CXH<DB0WHV<
DB0PDF<DB0SM<PI8DAZ<PI8GCB<PI8WFL<PI8HZW
Sent: 000406/0514Z @:PI8HZW.#ZH1.NLD.EU #:51523 [Hazerswoude, JO22HC] FBB7.00g2
From: PA1HR@PI8HZW.#ZH1.NLD.EU
To : LINUX@EU
Dear OM, YL,
Who is using the combination LINUX, LinkTrxIIIA (DF9IC) and OptoScc (PA0HZP)?
Please note the A after LinkTrxIII!
We have problems with this configuration.
We use LINUX SuSE 6.3 with XNET 1.20. It works fine, expect for the in- and
output with the LinkTrxIIIA. This 23 cms TRX does not use modems, but puts the
data direct onto the VCO. With NETCHL and BPQ software we have no problems,
but it seems that LINUX cannot handle this "no-modem-LinkTrxIIIA". Perhaps it
is a minor problem...
Many thanks in advance for your kind information!
73, Hans PA1HR @ PI8HZW.#ZH1.NLD.EU
* 73 * Ham Radio * PA1HR * Hans Remeeus * ex PA3EZQ *
* Hazerswoude * JO22HC * R28 * PA1HR @ PI8HZW.#ZH1.NLD.EU *
* PWGN, VERON (NL425), VRZA (PA2075), ARRL *
* SYSOP PI8HZW & PI8MBQ *
e-mail: hans@remeeus.nl
site: www.remeeus.nl
Read previous mail | Read next mail
| |
