| |
VK8PDG > KENWOD 03.08.03 17:37l 43 Lines 1876 Bytes #999 (0) @ WW
BID : 8268_VK8PDG
Read: GUEST DB0FHN VE7HFY
Subj: TS930.3of3
Path: DB0FHN<DB0RGB<OK0PPL<DB0RES<ON0BEL<IR0NET<VK3TE<VK8PDG
Sent: 030804/0950Z @:VK8PDG.PLM.#NT.AUS.OC #:8268 FBB7.00i $:8268_VK8PDG
From: VK8PDG@VK8PDG.PLM.#NT.AUS.OC
To : KENWOD@WW
TS-930 MODS
-----------
THE EARLY 930 WILL RECEIVE BUT NOT TRANSMIT ON THE 3 NEW WARC BANDS. IF
TRANSMIT CAPABILITY IS DESIRED, A MINOR WIRING ADDITION IS REQUIRED...
1. UNPLUG THE AC POWER CABLE.
2. REMOVE THE TRANSCEIVER TOP COVER.
3. REMOVE THE 4 SCREWS FROM THE SPEAKER
MOUNTING AND TOP PANEL ASSEMBLY.
4. SWING THE ASSEMBLY AWAY AND UNPLUG THE RED-BLACK BATTERY BACK-UP
LEADS FROM THE DIGITAL UNIT X54-1680-00..H5. CAREFULLY ADD A WIRE
JUMPER FROM IC-23 (PIN 12) TO IC-24 (PIN 8)(GRD) FOR SIMPLICITY,
THIS MAY BE TACK SOLDERED ON THE COMPONENT SIDE OF THE BOARD.
DO NOT CREATE SOLDER BRIDGE OR DROP SOLDER OR WIRE SHARDS INTO THE RADIO.
6. THIS COMPLETES THE MOD. REASSEMBLE THE UNIT BEING CERTAIN NOT TO PINCH
ANY LEADS UNDER THE SPEAKER BRACKET ASSEMBLY.
Reposted By VK8PDG
(``\-^.^-/'') From The Land Down Under (``\-^.^-/'')
`( 0 0 )' `( 0 0 )'
IIIIIIIIIIooO (_) OooIIIIIIUIIUIIIIIIIIIIIooO (_)OooIIIIII
U U VK8PDG@winlink.org
WW LOCATOR -PH57LM U U Sysops: Peter
Winlink/WinFBB32/APRS U U Info on : QRZ.COM
VK8PDG-L EchoLink Node 7593 .. RF DTMF Link Freq: 146.150 Mhz
YOUR PACTOR/PACKET GATEWAY IN THE NORTHERN TERRITORY.
TelNet BBS : vk8pdg.no-ip.com Port:23
Ampr Net: vk8pdg.ampr.org TCP/IP 44.136.230.1
** Supporting Digital Communications in VK8 **
<><> ( ) Oo. VK8PDG @ VK8PDG.PLM.#NT.AUS.OC ( ) Oo. <><>
EIIIIIIIIIII\_)III( )IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII\_)III( )IIIIII
Read previous mail | Read next mail
| |
