| |
G0VRE > KAM 08.01.96 02:08l 32 Lines 1334 Bytes #-11136 (0) @ WW
BID : 21703_GB7DTX
Read: DH9MAG GUEST
Subj: Probs with "BUSY" and disconnect
Path: DB0AAB<DB0KCP<OE9XPI<DB0CZ<DB0GE<LX0PAC<ON5VL<ON4RAT<ON7RC<ON4AWP<
ON4KTK<GB7SXE<GB7YUH<GB7WIG<GB7DUG<GB7HSN<GB7TUT<GB7DAA<LWBBBS<GB7LWB<
GB7AVM<GB7WAR<GB7COV<GB7MAX<GB7PZT<GB7GLO<GB7SUT<GB7WRG<GB7BAD<GB7NOT<
GB7MAM<GB7DTX
Sent: 960104/1919Z @:GB7DTX.#26.GBR.EU #:21703 [Lincoln] $:21703_GB7DTX
From: G0VRE@GB7DTX.#26.GBR.EU
To : KAM@WWW
Hello and thanks for reading this.
I have a problem with my Kam......What's happening is as follows:
If I set my CMSG to PBBS and then exit the packet terminal program
ie PAKET 6.1 on the first time somebody connects to my main node
( G0VRE ) then it will connect and transfer the user to my PBBS.
On any other time after that and somebody tries to connect to my
main node it just says.."G0VRE BUSY" and immediately disconnects.
It will accept calls on G0VRE-1 no problems and accept messages
as usual but as soon as I exit PAKET 6.1 and set CMSG to PBBS
it just says "G0VRE BUSY" and disconnects again.
The only commands that PAKET 6 passes to the Kam on exiting the prog
is the CMSG PBBS command.
My friend who also has a Kam has exactly the same problem.....
The thing is I don't think it's always done this, we have more than
likely set one of the parameters incorrectly but I have spent ages
and still not managed to find it.
If you have any ideas please let me know as it is starting to annoy me.
Bye for now and thanks....de Tony G0VRE@GB7DTX.#26.GBR.EU
Read previous mail | Read next mail
| |
