| |
I6KZR > KAM 08.05.04 15:29l 70 Lines 1536 Bytes #999 (0) @ WW
BID : 5003_I6KZR
Read: GUEST
Subj: Re: kam+
Path: DB0FHN<DB0FOR<DB0SIF<DB0FSG<I4UKI<IK6ZDE<I6ZLO<IQ6TC
Sent: 040508/1304Z @:IQ6TC.#AP.IMAR.ITA.EU #:31512 [PORTO S.GIORGIO] FBB7.00i
From: I6KZR@IQ6TC.#AP.IMAR.ITA.EU
To : KAM@WW
Inviato da: I6KZR@IQ6TC.#AP.IMAR.ITA.EU ON4IS@ON0DOR ON4IS
In un suo messaggio ON4IS ha scritto:
}
} From: ON4IS@ON0DOR.#MNS.HT.BEL.EU
} To : KAM@WW
}
} I have a kam+ and I want to use the new morse code for '@' and the kam
} don't accept.
} My entry is : morse *--*-*($40) $4143(AC)
} What is wrong ?
} Thank you for your help.
} Jac ON4IS
Hallo JAC,
input in the MORSE command must be made in this way:
MORSE (TX CHAR <Hex or dec ASCII>) RX (CHAR <Hex or dec ASCII>)
Where:
TX CHAR is: The ONLY ONE letter typed from keyboard. We have not a key that
performs *--*-* (:-( so it's impossible to put in this variable
every value... (Not *--*-* but $1A or $21 etc.).
@ has TWO letters A and C and KAM don't accept two letters in the
command.
RX CHAR is: The letter you want is typed in the screen, in this case $40.
Lenght is insignificant.
I.E. If the new code *--*-* was represented by the key ! the input code should
be:
MORSE $21 $40
visualized by KAM as
*--*-* MORSE $21 $40
But ! is ***.* (:-( Sorry!
Frase del giorno:
Non si nasce donne: si diventa (Simone de Beauvoir)
73 Ciao a tutti Renzo.
li, sab 08 mag 2004 10:12 (+2.00) CDT
/___/____/
/ / /
||
|| I6KZR Fermo, Italy
|| BBS I6KZR@IQ6TC.#AP.IMAR.ITA.EU
|| e_mail i6kzr@i6kzr.it
|| web http://www.i6kzr.it
|| TCPip: 44.134.243.003
Messaggio inviato con Sally V3.2.130 software packet per Windows 32bit.
Read previous mail | Read next mail
| |
