| |
ZS1ACW > KPC-3 12.03.04 06:51l 35 Lines 1229 Bytes #999 (0) @ WW
BID : 49420_ZS1ACW
Read: DB0FHN GUEST
Subj: KA-Node forwarding using KPC-3
Path: DB0FHN<DB0RGB<DB0FSG<DK0MUN<UA6ADV<ZS6RO<ZS1ACW
Sent: 040311/1127Z @:ZS1ACW.GRT.WCP.ZAF.AF #:49420 [Stilbaai] FBB7.00g25
From: ZS1ACW@ZS1ACW.GRT.WCP.ZAF.AF
To : KPC-3@WW
Hi there, thanks for reading,
Fbb BBS1 KA-Node Fbb BBS2
Considder this X-------------------[]----------------------X
I want to be able to connect to the node in the middle and forward
from FBB BBS1 via the node to BBS2. It is a KA-node used in a
KPC-3 Kantronics TNC called a 'Wild Node'. I have tried this but does
not seem to work. If you have a lot of experience using a node,
what exactly is the requirement for this? Does each FBB station
have to have a node before it will work from an outside station?
I remember forwarding via ZS6FB-3, ZS6AES to ZS0MEE and they were
all nodes mine was not. How can I get this above situation to work
out for us here?
I use my FWD\callsign file to forward:
C C NODE callsign
C C FBB STATION
callsign displayed on the screen is now ZS1ACW-15 is this correct
and will it go further?
At the moment I can connect to the node in the middle and even
get BBS2 prompt but that is where the forwarding ends, BBS1 does not send
FF or whatever is needed to continue...please help me on this! I even
asked Kantronics, but those service guys dont seem to have an answer.
Best regards
Jan ZS1ACW
Read previous mail | Read next mail
| |
