| |
IW1BXL > KPC 05.08.95 02:18l 29 Lines 907 Bytes #999 (0) @ WW
BID : 5_IW1BXL
Read: GUEST
Subj: PBFORWRD parameter
Path: DB0AAB<DB0MFG<OE7XCI<IW3AQL<IN3TUR<IK4NZD<IW2DNI<IW2KTL<IK1MSL<IW1BBL<
IK1MAP<I1YLM<IK1JNS<IK1EQE
Sent: 950804/1903Z @:IK1EQE.IPIE.ITA.EU #:4397 [Nizza M.to, AT] $:5_IW1BXL
From: IW1BXL@IK1EQE.IPIE.ITA.EU
To : KPC@WW
IW1BXL/TPK 1.82 Msg #:5 Date:04-08-95 Time:21:02Z
Hi all,
I've got a Kantronics KPC-3 (ver. 5.1) TNC and i would have comments about
the correct use of the PBFORWRD parameter. The manual says that the PBBS of
the tnc can try to connect the full service BBS EVERY n hours. But it seems
to work ONLY if there are messages (not held) waiting in the TNC.
Anyone has experienced the same problem ?
My objective should be to let the KPC3 on without the PC connected and
automatically receive messages.
The PBREVERS is ON and i'm flagged as a BBS in the configuration of my
homebbs.
Any comment or tip would be greatly apreciated
Thanks
IW1BXL / Francesco - Acqui T. (AL) * ITALY *
Ax25 IW1BXL@IK1EQE.IPIE.ITA.EU
Internet CALC0X@UNI-BOCCONI.IT
Read previous mail | Read next mail
| |
