| |
HB9SH > KAM 23.06.00 14:09l 23 Lines 790 Bytes #-9050 (0) @ WW
BID : N60HB9OS004
Read: GUEST
Subj: NET/Mac software and KPC-9612
Path: DB0AAB<DB0KFB<DB0CZ<HB9EAS<HB9OS
Sent: 000623/1155l @:HB9OS.CHE.EU [DRC Ost-Schweiz] DB19c1 $:N60HB9OS004
From: HB9SH @ HB9OS.CHE.EU (Joe)
To: KAM @ WW
hello dr om and tnx for reading this msg ....
I am using a Macintosh- Computer
For AX 25 operation I use the MacRATT software and as TNC
I am using the Kantronics KPC-9612 (also 9612Plus). With
this software I could create MACRO-cmds and with these
commands I can switch the TNC btw port 1 (1200 baud) and
port 2 (for 9600 baud operation).
My problem:
I am also using the TCP/IP software for Macintosh (NET/Mac)
which works fine for 1200 baud. I would also like to use it
for 9600 baud operation, but I found no way to modify the
"autoexec.net" that the TNC (9612 or 9612plus) would switch
to port 2 .
Does anybody have experience with
Macintosh - NET/Mac (software) and KPC-9612 ?
TNX for any info, 73 de Joe/HB9SH @ HB9OS.CHE.EU
Read previous mail | Read next mail
| |
