| |
G0SFQ > JRC 23.09.06 07:15l 22 Lines 1160 Bytes #999 (0) @ WW
BID : 41807_GB7HOL
Read: GUEST DK3UD
Subj: JRC NRD-345
Path: DB0FHN<DB0MRW<DB0FOR<DB0SIF<DB0EA<DB0RES<TU5EX<SR1BSZ<SP7MGD<CE8FGC<
VK6HGR<GB7YFS<GB7COV<GB7BED<GB7HOL
Sent: 060907/1726Z @:GB7HOL.#22.GBR.EU #:41807 [Holbeach] FBB7.00i $:41807_GB7H
From: G0SFQ@GB7HOL.#22.GBR.EU
To : JRC@WW
I have a problem with the toggle power on/off switch on my JRC NRD-345
Reciever. It started to play up a few weeks ago. I had not used the
reciever for a few months and when I pushed the switch up from off to on
I got no readout but received white noise only. I toggled it a few times
and eventualy got a readout but the backlight was very dull and recieve
was then ok. I toggled it a few more times and the signal meter light
then came on. I then tried the Timer position and again no backlight.
The state of play at the moment is that if I toggle on I get readout and
recive but not signal meter light.
When I toggle the switch down to Timer I get the same condition as the on
position i.e readout and recive but no timer clock.
I have looked on the Net but have not found a solution or reason for what
is happening, Looking at the wiring at the back of the switch, it appears
to not to be a simple on off switch. I think that their might be a relay
somewhere that is not working properly?
Any ideas as what could be the solution would be most gratefully
accepted.
73 de John G0SFQ @ GB7HOL#22.GBR.EU
Read previous mail | Read next mail
| |
