| |
I0OJJ > JNOS2 25.11.19 12:22l 99 Lines 3067 Bytes #-2344 (0) @ WW
BID : 95439_AA6HF
Read: DF7EAV DJ6UX GUEST
Subj: Re: This BID thing...
Path: DB0FHN<DB0FFL<OE5XBL<F1OYP<F4DUR<LU4ECL<IW8PGT<I3XTY<GB7COW<GB7CIP<
AA6HF<N2NOV<GB7CIP<ON0AR<SV1CMG<OK0NBR<IR2UBX<IW2OHX<IR1UAW<I0OJJ
Sent: 191103/1302z @:I0OJJ.ITA.EU [Rome] #:31717 $:d774a_I0OJJ
>From i0ojj%i0ojj.ita.eu@n2nov.ampr.org Sun Nov 3 20:43:28 2019
Received: from n2nov.ampr.org by n2nov.ampr.org ([JNOS]) with SMTP
id AA820332 ; Sun, 03 Nov 2019 20:43:28 EST
Message-Id: <D774A_I0OJJ@GB7CIP.bbs>
>From: i0ojj@i0ojj.ita.eu
X-JNOS-User-Port: Circuit (CIPBBS:GB7CIP GB7CIP) -> Sending message
> Date: 03 Nov 19 05:00:00 GMT
> From: n1uro@n1uro.#cct.ct.usa.noam
> To: jnos2@ww
> Subject: Re: This BID thing and DUPES and stuff
>
> R:191103/0501z @:N1URO.#JNOS.CT.USA.NOAM [Unionville] #:1903 $:33494_N1URO
> R:191103/0500Z @:N1URO.#CCT.CT.USA.NOAM #:33494 [Unionville] $:33494_N1URO
>
> From: N1URO@N1URO.#CCT.CT.USA.NOAM
> To : JNOS2@WW
>
>
> Gus;
>
>> I know that all functions as per above; perhaps I don't found
>> the right way to explain what I wish, so try again.
>> I want to have the same capability (as permitted/allowed by FBB
>> and others) to 'upload' a 'ready-made' message, at jnos prompt,
>> (formatted like your above manual enters), by using a normal
>> packet terminal program...
>
> Whatever your user perms are in ftpusers, simply subtract 8192 from them.
> Also refrain from sending any SID and you will not be forced to come up
> with a BID. JNOS will assign one automatically since it's considered
> locally generated mail.
>
> For example:
> Say you're flagged with 73748 which contains:
> user is a bbs
> default is no escap char
> telnet gateway access
> read/write
>
> then remove "user is a bbs"
>
> 73748 - 8192 = 65556
>
> One neat feature about LinFBB which this program I wrote uses is an auto
> mail import feature. I don't even need to login to my LinFBB. All I need to
> do is start the program and write my mail. When I save it, FBB sees where it's
> located and automatically pulls it in and processes it. I would love if I can
> adjust it for JNOS, which I might be able to do!
>
> You've noticed a couple of JNOS BBS duping mail still by changing bids.
> None have appeared that I know of from the no-BID patch.
No dupes seen anymore... as today.
Now:
The fact is that I0OJJ is flagged ONLY as 8192
(BBS only) so subtracting 8192 become 0 and
I should be EXCLUDED :)
I wanna be ONLY the 'BBS only' setup.
To Maiko attention:
Staying my setup as just described, the situation
appears like the following:
=>c i0ojj-8
*** connected to I0OJJ-8
[JNOS-2.0m-B1FHIM$]
>
an
New mail in: mbox ita local sysop amsat dxnews
>
it indicated that ALL jnos 'areas' have 'New mail'
and each area declare its 'new message quantity'
when accessed; so when messages are read and/or
all areas are accessed and then close the session
whit the B(ye) command, all is OK.
Then, if I repeat a new connect command, as above,
the situation remains the same: namely I got always
the same 'New mail' indication:
New mail in: mbox ita local sysop amsat dxnews
so, if possible, as per 'normal' User access, the
Jnos should be instructed to reset the New mail
indications and show only the 'new' real messages
arrived between an access to another... TNX!
--
73 and ciao, gustavo i0ojj/ir0aab/ir0eq
Read previous mail | Read next mail
| |
