| |
CX2SA > ISS 19.08.06 15:05l 73 Lines 3488 Bytes #999 (0) @ WW
BID : 38047_CX2SA
Read: GUEST OE7FMI
Subj: ISS STATUS REPORT #06-38
Path: DB0FHN<DB0MRW<DB0RGB<OK0PPL<DB0RES<TU5EX<IW8PGT<CX2SA
Sent: 060819/1250Z @:CX2SA.LAV.URY.SA #:38047 [Minas] FBB7.00e $:38047_CX2SA
From: CX2SA@CX2SA.LAV.URY.SA
To : ISS@WW
SUBMITTED BY ARTHUR N1ORC - AMSAT A/C #31468
*International Space Station Status Report #06-38*
*3 p.m. CDT, Friday, Aug. 18, 2006 *
*Expedition 13 Crew*
The astronauts aboard the International Space Station spent much of
their week preparing for the arrival of the Space Shuttle Atlantis, set
for launch Aug. 27 on the STS-115 mission.
Commander Pavel Vinogradov, Flight Engineer and NASA Science Officer
Jeff Williams and European Space Agency astronaut Thomas Reiter of
Germany prepared for Atlantis to deliver a new section of the station's
girder-like truss. During Atlantis' mission, astronauts will attach the
new P3/P4 truss, a segment that includes a huge new set of solar arrays
and a giant rotary joint that allows the arrays to track the sun. The
mission will mark the resumption of station assembly by delivering the
first large new component to the station since late 2002.
During the shuttle flight, Atlantis' crew members will conduct three
spacewalks to complete the installation and setup of the new segment.
The spacewalks will begin from the station's Quest Airlock. Complex
robotics work is involved as the 17.5-ton, bus-sized truss section is
handed from the shuttle arm to the station arm for installation.
In preparation for Atlantis, the station crew trained on the robotic
Canadarm2 and packed items for return to Earth on the shuttle. They also
reviewed Atlantis' mission timeline and trained to photograph the
shuttle's heat shield as the orbiter does a backflip while approaching
the station. The crew also did several physiological and psychological
tests and experiments designed to learn more about how humans react to
long periods of weightlessness.
Early this week Williams worked with flight controllers and the Dynamic
Onboard Ubiquitous Graphics (DOUG) program on robotic arm activities.
DOUG simulates the arm's operation for training.
Williams moved the arm from a base on the U.S. Destiny Lab to a power
and data grapple fixture on the mobile transporter, enabling the arm to
work at different sites along the main truss' railway. Subsequently, in
an inchworm-like maneuver, the arm was moved to a different grapple
fixture on the transporter and used to inspect the outboard end of the
P1 truss, where the new segment will be attached. The crew also reviewed
installation procedures for the new segment and Williams did spacesuit
maintenance.
Throughout the week Vinogradov and Reiter worked on the Russian-German
Plasma Crystal experiment. The experiment examines the behavior of tiny
particles excited by high-frequency radio signals in a vacuum chamber
and functions by itself most of the time. It requires a crew member to
work with it, however, at some intervals during the day.
The Earthkam experiment was activated this week. Earthkam allows
students to request photos from space of specific locations on Earth via
email and later receive those photos electronically. The
remote-controlled camera has been used since October 2001.
The next station status report will be issued on Friday, Aug. 25, or
earlier if events warrant. For more about the crew's activities and
station sighting opportunities, visit:
http://www.nasa.gov/station
----
Sent via sarex@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/sarex
Read previous mail | Read next mail
| |
