| |
M1BYT > IBM 09.04.06 21:54l 33 Lines 1557 Bytes #999 (0) @ WW
BID : A63837M1BYT
Read: GUEST DC9BM
Subj: Re: BBC micro
Path: DB0FHN<DB0RGB<DB0SL<DB0FSG<DB0PV<DB0WGS<OE2XUM<OE5XBR<OE1XAB<HG8LXL<
I0TVL<ON0AR<GB7FCR
Sent: 060409/1505Z @:GB7FCR.#16.GBR.EU #:36607 [Blackpool] FBB-7.03a $:A63837M1
From: M1BYT@GB7FCR.#16.GBR.EU
To : IBM@WW
M0JFE Opined with considerable skill:-
> I have gat a bbc and inside it has an Apex Rom-Ram board the problem is
> two of the pins on the dill inset have broken I require a replacement but
> the problem is that they are a stand off of about 10mm any ideas how to
> get over this problem as I like all the retro computers and collect them
> for my own use but never had a board like this in a BBC any help welcome.
> Thanks
I once repaired a similar problem by using a sewing needle to replace the
broken pin. I cut it to length, ground the plating off, then soldered it to
the stub. Another way might be to put a series of the turned pin type sockets
one on top of the other to get the height, then finally solder the upper one
directly onto the plug in board.
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º 73 from Harry, M1BYT @ GB7FCR.#16.GBR.EU º
ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹
º International Museums Weekend 18th+19th June 2005 º
º www.ukradioamateur.co.uk/imw/index.html º
ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹
º The ARC's FL/RAE courses + Newcomers Introduction º
º to amateur radio:- http://www.ukradioamateur.co.uk/ º
ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍËÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹
º QTH: Garforth, W. Yorks.. º Timed 14:57 º
º harry.m1byt@tiscali.co.uk º 09 Apr 06 º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÊÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Message sent using WinPack-Telnet V6.80
Read previous mail | Read next mail
| |
