| |
EI3DIB > PC 04.04.06 20:36l 30 Lines 1213 Bytes #999 (0) @ WW
BID : 33563_EI3DIB
Read: GUEST DC9BM
Subj: USB Driver Help ?
Path: DB0FHN<DB0MRW<DK0WUE<DB0RES<ON0BEL<LA2MV<GB7CIP<EI3DIB
Sent: 060404/2023Z @:EI3DIB.#TIPP.IRL.EU #:33563 [Ardfinnan] FBB7.00i $:33563_E
From: EI3DIB@EI3DIB.#TIPP.IRL.EU
To : PC@WW
HI and thank you for reading.
Was checking over a free Gift PC Ready to pass along to a friend.
It is a Packard Bell Pentium 133 and has W98 and I thought the only problem
was the Modem being faulty so fitted a S/H one I had, then spotted the 2 USB
Ports on the back but the BIOS had them disabled ?
Setting to Enabled and it started ok until it went looking for
JUMPDRIVE.GEYSR ? Not on the W98 disk or anything else I had, so I did a
quick search on the net ? quick and short as I have only dial up !!!
Nothing only URL's and even the Packard Bell sight was no help.
I am guessing this is just to old now for support so I am taking a chance
that as us Ameteur Radio types tend to keep things for ever ? Someone on this
mode may have the driver I am looking for ? Or of course someone may be able
to tell me that it was an early version with problems thus the Disabled ?
Any help would be apreciated, the PC has been passed on but is near enough if
I can get this bit to work for them they will be thankfull, there was no
printer with the gift and most tend to be USB these days thus the problem.
Best 73 from John, Sysop @ EI3DIB.#TIPP.IRL.EU
Read previous mail | Read next mail
| |
