| |
ZL1ANM > HELP 19.01.09 00:00l 35 Lines 1351 Bytes #999 (0) @ WW
BID : ZL1ANM-540
Read: GUEST
Subj: Re: winmm.dll error???
Path: DB0FHN<DB0FOR<DB0SIF<HB9EAS<OK0NHD<DB0ERF<DB0FBB<DB0IUZ<DB0OVN<DB0GOS<
ON0AR<F1ZNR<SV1CMG<DK0WUE<7M3TJZ<ZL2BAU<ZL1AB
Sent: 090118/2050Z @:ZL1AB.#06.NZL.OC #:24444 [AUCKLAND] FBB7.00i $:ZL1ANM-540
From: ZL1ANM@ZL1AB.#06.NZL.OC
To : HELP@WW
>From: G3MHR@GB7NOT.#23.GBR.EU
>To : HELP@WW
>
>
>I have been using my old Win98se PC and MMSSTV Prog with good results for
>quite some time now!!.
>Recently over the Christmas Break I got reports of poor quality &
>distorted Pictures both TX & RXing.
>When I click to exit the Prog I get this message up on the screen.
>(( illegal operation & will shut down, contact your Prog Vendor. ))
> Invalid page fault in module winmm.dll at 0167:bfdf34c9
>I cannot find winmm.dll in the MMSSTV Prog... But I can find it in the
>Windows System File.
>The PC works fine with my Kantronics KPC-2 TNC for Packet and other Progs.
>Help any Ideas for correcting this error please.
>I did try to float across a winmm.dll file off a floppy in A drive to the
>Windows System file, I then got the Message saying (( Cannot create or
>replace winmm.dll the specified file is being used by Windows.)).
> Thanks for any Ideas.
>
>73 - Eric, G3MHR @ GB7NOT
I had a similar problem in XP, when for no apparent reason, XP refused to
start. It reported a certain .dll file missing or corrupt. I solved the
problem by running my original XP CD and doing a repair. Try your original
'98 disk, if you still have it, or borrow one.
73 de Neil ZL1ANM
T4 1.5à24
Read previous mail | Read next mail
| |
