| |
GM3YEW > HELP 07.07.07 00:41l 49 Lines 1249 Bytes #999 (0) @ EU
BID : 69643_GB7ESX
Read: DL6DBA GUEST
Subj: Sally/AGWPE
Path: DB0FHN<DB0FOR<DB0MRW<DK0WUE<DB0RES<ON0AR<GB7YKS<GB7SYP<GB7ESX
Sent: 070706/1751z 69643@GB7ESX.#31.GBR.EU $:69643_GB7ESX [Witham, Esx]NNA V3.1
Hi All
I sent this out from GB7YW but I'm not convinced that it has found it's way on
to the network at large,
Here it is again :-
Date: Sun, 01 Jul 2007 20:37:01
From: GM3YEW (Dave)
To: HELP@EU
Subject: Sally/AGWPE
From: GM3YEW@GB7YEW.#79.GBR.EU
Hi All
I'm trying to set up Sally on another computer as a standby to my "main" machine
(I'm presently using Sally and AGWPE on the main machine to send this).
I have transferred the ZIP files over and unzipped them into folders as in the
main machine.
Both AGWPE and Sally seen to run quite happily but when Sally tries to connect
to AGWPE, I get the following
error message :-
Winsock error PM4 10061 and the text "Cannot connect to AWPPE, retry" y/n
As far as I can tell, all the details on the stanby machine are the same as the
main machine.
I haven't tried to connect to the "outside " world using AGW's terminal, or
monitir any packets as I don't have a
TNC connected to the serial port on the standby machine yet (I can't see that
it is relevant)
I am using the DEDHOST in the AGWPE parameters ....
Any thoughts ?
73 Dave. GM3YEW
(Message sent with Sally 4.0.210)
Timed Tuesday 11 January 2005 16:26 gmt
BBS GM3YEW@GB7YEW
replies to either GB7YEW or GB7EX - thanks
Read previous mail | Read next mail
| |
