| |
VK3EUB > HELP 04.08.06 10:08l 49 Lines 1085 Bytes #999 (0) @ WW
BID : 355_VK3EUB
Read: GUEST
Subj: Re: ICOM 820 problem
Path: DB0FHN<DB0THA<DB0HDF<DB0HOT<DB0MRW<OK0PKL<OK0PCC<OK0NAG<9A0BBS<VK6BBS<
VK3AVE<VK3AYM<VK3AC<VK3ATM<VK3FIS
Sent: 060802/1821Z @:VK3FIS.#MEL.VIC.AUS.OC #:3583 [Rye] $:355_VK3EUB
From: VK3EUB@VK3FIS.#MEL.VIC.AUS.OC
To : HELP@WW
VK3EUB/TPK 1.83e Msg #:355 Local Date: 02-08-2006 Time: 2:15 PM (04:15 UTC)
From : VK3EUB@VK3FIS.#MEL.VIC.AUS.OC
To : HELP@WW
ICOM FAQ for IC-820H
Symptom : Intermittent/no RX/TX . Display reads ---------
Probable Cause: PLL unlock.
Cure : Replace bad X1 on PLL
_____________________
Symptom : Some front panel controls on left side do not work.
(mode switch, lock switch , etc )
Cure : Rework bad or cracked solder at J1 on SW-A unit.
_____________________
Symptom : Unit stuck in TX mode.
Cure : Replace bad Q40 on main unit.
73's Brian
>From: VE2GGY@VA2CLM.#MTL.QC.CAN.NOAM
>To : HELP@WW
>
>VE2GGY/TPK 1.83d Msg #:2935 Date:24-02-01 Time:22:54Z
>
>
>Hi everybody
>I was using an ICOM 820 H for some months
>then a day dispaly was replaced by one dashed line...
>later I could not receive or transmit...
>
>Anybody had this trouble ? it seems that synthesiser is not
>working anymore ?
>
>Help is welcome
>
>73 Guy VE2GGY
Read previous mail | Read next mail
| |
