| |
PA2WIV > HELP 09.06.06 12:47l 38 Lines 977 Bytes #999 (0) @ WW
BID : 1934_PA2WIV
Read: GUEST
Subj: Re:7plus recommended size limits ....
Path: DB0FHN<DB0RGB<OK0PPL<DB0RES<PI8DAZ<PI8AWT<PI8CDR
Sent: 060609/1033Z @:PI8CDR.#DRE.NLD.EU #:65455 [Beilen] $:1934_PA2WIV
From: PA2WIV@PI8CDR.#DRE.NLD.EU
To : HELP@WW
# Generated by: TstHWin v2.21b - Registered to PA2WIV
# On : 9-6-06 12:26:24
# UTC: 9-6-06 10:26:24
>From: M0CNL@GB7COS.#31.GBR.EU
>To : HELP@WWW
>
>
>Hi
>
>I have been thinking of sending out a couple of my programs but am unsure of
>what the current size limits and part size limitations recommendations are.
>and to save resends on failed parts are people aware of what par2 files are
>and their use?
> All the Best
>
>Paul
...7Kb will not give problems in aeria's with poor connections.
If you make the parts by hand using 7plus, use the names that 7plus makes!
The number of parts is less important, 7plus will notice you when the
number of poarts is to big.
..and be sure that you can send .cor files on receiving .err files!
Of course it is a lot easier when your station all handles automaticly as
the case is here....
Tnx in advance for sending!!!
Vy 73 Tinus PA2WIV@PI8CDR
e-mail alias at: amsat.org / qsl.net
Read previous mail | Read next mail
| |
